HP w2408: A "New" Twist on 24" LCDs
- Posted in
- Displays
Printing
Results
Brightness and Contrast Ratio
For those who have a need to match colors between their computer displays, cameras, and printers, what works well for computing purposes often isn't the best suited for doing other image related work. To help people who work in such areas match their computer colors to their paper colors better, standards were established. For print work, the standard is a gamma of 2.2, a black point of 0.60 nits, and a white point of 100 nits. We attempt to calibrate all the monitors for these settings.
Finding the appropriate settings to reach these levels can be a time-consuming process for some of the displays. It may require numerous iterations through the calibration process to end up with the desired white point, and on some LCDs it might not even be possible to reach a satisfactory result (though that hasn't occurred yet). The nature of LCDs is such that we are unable to get both an accurate white point and an accurate black point according to printing requirements (our black levels always ended up darker than they are supposed to be), but we did manage to get near the desired 100 nits white point on all of the tested displays. We used brightness/contrast settings of 42/80 on the w2408, with RGB at 169/162/175.
For reference, we have included the target value in the following graphs, so the greater the deviance of a display from the targeted value, the less suitable (in theory) a display becomes for print work.



Since very slight differences in brightness are not a huge deal, we did not attempt to get 100% accuracy on the white point, but further tuning of the various displays would have made it possible to get closer to 100 nits. The primary goal was to get the white point near 100 nits. The target black point is nearly impossible to achieve once we have reached the target white point with any LCD that we have used. Due to the reduced brightness, contrast ratios are often lower, but that is inherent with the target settings. Interesting to note, we get higher black levels on many of the 24" LCDs than on other options when attempting to calibrate for print. The HP w2408 ranks third in terms of closeness to the print ideal.
Color Accuracy
Given the importance of accurate colors for printing work, we need to adjust the desired Delta E scale. A Delta E of less than 1.0 is definitely the goal here, and 1.0 to 2.0 is merely acceptable. Scores above 2.0 generally mean a display is not fit for printing professionals.


The two 30" displays clearly take the lead in this test, while the w2408 falls in the middle of the pack. Most of the scores fall below 2.0, which is better than the w2207. If you want 100/0.60 white/black settings for print work, this is one of the better options, though the Gateway FPD2485w and Dell 2407WFP still rated better.
Originally published at https://www.anandtech.com/show/2408 (Wayback Machine).