HGST Deskstar NAS 6 TB Review
Multi-Client Access - NAS Environment
We configured three of the HGST Deskstar NAS drives in a RAID-5 volume in the QNAP TS-EC1279U-SAS-RP. A CIFS share in the volume was subject to some IOMeter tests with access from up to 25 VMs simultaneously. The following four graphs show the total available bandwidth and the average response time while being subject to different types of workloads through IOMeter. IOMeter also reports various other metrics of interest such as maximum response time, read and write IOPS, separate read and write bandwidth figures etc. Some of the interesting aspects from our IOMeter benchmarking run are available here.




We see that the sequential accesses are still limited by the network link, but, this time, on the NAS side. On the other hand, our random access tests show markedly better performance for drives such as the HGST Deskstar NAS. In particular, response times in the random workloads is almost 5x better over the WD Red when the disks are subject to simultaneous accesses from a large number of clients. Against drives such as the Seagate Enterprise Capacity v4 or the Enterprise NAS HDD, the Deskstar NAS does manage to hold its own. Anyhow, the target market for those drives (and the firmware optimizations) are different enough to not make a big case out of the observed performance differences.
Originally published at https://www.anandtech.com/show/8794/hgst-deskstar-nas-6-tb-review (Wayback Machine).