Corsair TX750 V2: New and Improved
Noise Levels
| Sound Pressure Level | |
| Load | dB(A) |
| 10% | 24 |
| 20% | 24 |
| 50% | 25 |
| 80% | 32 |
| 100% | 36 |
| 110% | 38 |
The TX750 won't be a great fit if your goal is to create a silent or near-silent PC. On the other hand, the higher noise levels generally correspond directly with airflow, so this PSU should help reduce temperatures in your PC, which is especially important for SLI or CrossFire setups. We would still like to see less noise at low loads, since 75W output means there shouldn't be much heat to deal with. As usual, the fan rotates at full speed during overload and is close to 40 dBA. Most computers should not reach this level, but it is good to know that this PSU is still not the loudest one—we have seen worse results on other PSUs.
Efficiency and PFC
| 115VAC, 60Hz | ||
| Load | Efficiency | PFC |
| 10% | 79% | 0.926 |
| 20% | 85% | 0.950 |
| 50% | 86% | 0.980 |
| 80% | 84% | 0.988 |
| 100% | 84% | 0.991 |
| 110% | 83% | 0.992 |
| 230VAC, 50Hz | ||
| Load | Efficiency | PFC |
| 10% | 81% | 0.890 |
| 20% | 86% | 0.924 |
| 50% | 88% | 0.930 |
| 80% | 87% | 0.955 |
| 100% | 85% | 0.973 |
| 110% | 84% | 0.975 |
Note the difference the power grid makes.115VAC means higher current and more stress for all power supplies, while 230VAC shows a worse power factor at all loads. Nevertheless, 0.890-0.975 PFC is very good and most users will find 86-88% efficiency more than sufficient. While it doesn't quite make 80% efficiencey at 10% load, it is a good 80 Plus Bronze PSU for sure. With a low input voltage power factor is always over 0.90.
Originally published at https://www.anandtech.com/show/4311/corsair-tx750-v2-new-and-improved (Wayback Machine).