Archive 1997–2024

Corsair TX750 V2: New and Improved

Voltage Regulation

+3.3V regulation
Load Voltage
10% +1.21%
20% +1.00%
50% +0.72%
80% +0.43%
100% -0.30%
110% -0.38%

 

+5V regulation
Load Voltage
10% +1.20%
20% +1.16%
50% +0.85%
80% +0.60%
100% +0.29%
110% -0.40%

 

+12V regulation (worst rail)
Load Voltage
10% +0.75 %
20% +0.64 %
50% +0.40 %
80% +0.27 %
100% +0.11 %
110% -0.08 %

All the rails fall clearly within ATX specifications. They start slightly over the target voltage and end with results close to 0%. Since this PSU has two 12V outputs, we selected the worst rail for the tables (which is our standard procedure). +12V shows the best regulation, and will have no trouble with higher voltages. -0.08% at overload is one of the best results we have seen.

Ripple and Noise

+3.3V ripple quality
Load Ripple and Noise
10% 13mV
20% 14mV
50% 18mV
80% 22mV
100% 23mV
110% 25mV

 

+5V ripple quality
Load Ripple and Noise
10% 9mV
20% 11mV
50% 16mV
80% 18mV
100% 19mV
110% 21mV

 

+12V ripple quality (worst rail)
Load Ripple and Noise
10% 8mV
20% 12mV
50% 14mV
80% 26mV
100% 28mV
110% 33mV

Both smaller rails have less than 30mV ripple and noise, making this PSU is as good as the Antec HCG if not better. +12V has higher absolute ripple, but it's actually closer to spec as a percentage. All of the rails are far away from the limit. The TX750 V2 can't beat the Corsair AX 750W, so we now know why there is such a high price difference. Of course 80 Plus Gold is another reason to buy an AX-series PSU.

Originally published at https://www.anandtech.com/show/4311/corsair-tx750-v2-new-and-improved (Wayback Machine).