Motorola Droid 2 Review: Rebooting the Droid
Cellular and WiFi Performance
There’s been a bit of discussion about whether the Droid 2 has signal and antenna issues a la iPhone 4. I was excited to get testing, and ran the Droid 2 through our now-regular tests to measure attenuation from holding the phone in different positions.
| Signal Attenuation Comparison in dB—Lower is Better | |||||||
| Cupping Tightly | Holding Naturally | On an Open Palm | |||||
| Droid 2 | 11.5 | 5.1 | 4.5 | ||||
| BlackBerry Torch | 15.9 | 7.1 | 3.7 | ||||
| Dell Streak | 14.0 | 8.7 | 4.0 | ||||
| Droid X | 15.0 | 5.1 | 4.5 | ||||
| iPhone 4 | 24.6 | 19.8 | 9.2 | ||||
| iPhone 3GS | 14.3 | 1.9 | 0.2 | ||||
| HTC Nexus One | 17.7 | 10.7 | 6.7 | ||||
The Droid 2 has just lower than average worst case signal attenuation when cupped deliberately near the antenna in the bottom of the device. Remember, less attenuation is better here. The Droid 2 therefore doesn’t have any problems that stem from the antenna itself, what then of the entire stack?
Remember that on CDMA cellular systems like Sprint and Verizon, voice and data are separate. Voice always operates over 1xRTT (which can also carry data, but at a slower rate with a maximum of 153 kilobits/s) and requires its own slice of spectrum. For faster “3G” data on a CDMA system, EV-DO is used, which likewise also requires its own slice of spectrum. This combination of two technologies from the same family makes most modern CDMA-based cellular systems hybrid in nature, and almost all CDMA handsets can only tune one (1xRTT or EV-DO) at a time. This generally isn’t a problem—most of the time, your CDMA handset polls a 1xRTT paging channel to check for an incoming call, notification, or SMS periodically. How often that happens is defined by the Slot Cycle Index (SCI) which can be anywhere from 1.28 seconds to much higher. Sometimes you can set this parameter yourself in engineering menus (the number corresponds to x^2 seconds), but you can’t exceed a number defined by the cellular system.
There’s a trade-off of course. Longer indexes will earn you a measurable battery life savings, but you’ll get less time to respond to an incoming call—the call will ring until your phone polls and picks it up. Shorter indexes will notify you of calls much more quickly, but drain battery faster.
Android does a good job hiding this all away from the user. In fact, there’s no way to change the SCI on the Droid 2—whether you have access to an engineering menu where you can tweak those things is entirely up to the manufacturer. The Droid Eris, HTC EVO, and Galaxy S phones, for example, have a suite of engineering menus.
I rarely see the 1x symbol pop up even when texts are coming in (despite the fact that it actually is on 1x to receive SMS), and most applications gracefully wait and resume. However, it sometimes still does happen that things don’t work perfectly, and you’ll transact data during this period and get stuck on 1x for a while. That’s actually pretty normal, and I see it all the time on a variety of CDMA devices. On the whole, this data handover has gotten much faster, but there’s still a period where the phone will wait before starting a data call on EVDO after initiating one on 1x. Generally the longest this takes is 3 seconds. But after you’re on 1x, if you keep transferring data, you won’t hop back to EVDO—on every CDMA device I’ve ever used, that only happens when data is idle.
Originally published at https://www.anandtech.com/show/3908/motorola-droid-2-review-rebooting-the-droid (Wayback Machine).