Xigmatek NRP-HC1001 and NRP-HC1201 Power Supplies
- Posted in
- Cases/Cooling/PSUs
Cables and Connectors

The cable harnesses are very high quality and each of the harnesses is sleeved up to the last connector. This makes a very good impression but frankly doesn’t help the performance. All of the graphics card harnesses have an additional small ferrite core around them just prior to the connector. They say this helps to lower the ripple effect. There are eight SATA and Molex connectors, with decent lengths of up to 44”/110cm.

The ATX cable harnesses and the PEG harnesses are all 20”/50cm long. With six PEG connectors, one might think the company would include different lengths of harness as the graphics cards are usually one below the other. It seems we will need to wait for this kind of addition.
The Fan

There is a Yate Loon 140mm fan installed. The website shows a maximum of 2600RPM and 48dB(A) of acoustic noise. During our tests we fortunately didn’t measure RPMs that high, and therefore the noise level was also lower.
Originally published at https://www.anandtech.com/show/2501 (Wayback Machine).