Archive 1997–2024

Xigmatek NRP-HC1001 and NRP-HC1201 Power Supplies

Appearance


The power supplies come in a nice dark grey color. There is a huge 140mm fan installed on the bottom guarded with a black fan grille. On the side, we see what appears to be a leather sticker at first sight, but it's actually just a paper sticker. Looking at the Xigmatek website, the product page of the NRP series is also has a leather motif, which gives a consistent brand appearance.

There is not as much ventilation on the rear of these power supplies since there is a huge power button blocking some of the casing. In total there may be only 2/3 of the rear actually be in use for exhausting the hot air from inside the unit. A small plastic card partially blocks the fan; this is used more as air-guide since it directs the air through the filtering components.




The rear holds the jacks for the cable management. There are three colors: blue, red, and black. The black jacks are for the peripheral cable harnesses holding the SATA and Molex connectors. The blue and red jacks are for the 6-pin and 8-pin graphics card connectors. The two different colors show the two different 12V rails used for this purpose. The sticker shows two 12V rails with 36A each and this is where they come out of the power supply. The peripherals, mainboard, and CPU share the two 20A 12V rails.

Some pins of the jacks have a different shape, so that it's impossible for the user to plug the connectors into the wrong jack. Xigmatek also uses different colors so that nobody will make a mistake.


Originally published at https://www.anandtech.com/show/2501 (Wayback Machine).