Archive 1997–2024

Intel X38 Tango - Is High FSB Overclocking Worth It?

Judges Scores for the E8500 Quickstep

Crysis


CRYSIS
BENCHMARK - E8500 CPU


CRYSIS
BENCHMARK - E8500 CPU

Unreal Tournament 3


UT3
Benchmark - E8500 CPU


UT3
Benchmark - E8500 CPU

Cinebench 10


CINEBENCH
10

WinRAR 3.70


WinRAR
3.70 Cache & Memory

In the Crysis test, full stability is not achievable at 500FSB using the 8x multiplier, and we barely could finish benchmarks at the 7x multiplier. We tried a number of methods to get beyond this issue including Clock Twister adjustments, 2N memory speeds, and even an increase in CAS Latency and memory sub-timing adjustments. All of our endeavors failed; even with reduced performance levels we still had system instability.

This may be due to the rather coarse GTL adjustments offered by the Maximus Extreme, but more likely the problem is that Crysis is a very unforgiving benchmark at high FSB/Multiplier speeds. Therefore, a 45nm processor with anything less than an 8.5 multiplier is going to struggle in achieving 4GHz stable on this particular board when running this application.

We chose to run Crysis at high detail levels, as we believe owners of an 8800 GTS 512 will want to do the same. It is clear that a mere 100MHZ extra on the processor will do nothing for your frame rates at high detail levels, as the game is obviously GPU limited. We did notice a slight separation of 3~5 FPS between the multiplier settings on medium details.

In our other benchmarks, UT3 and CINEBENCH actually score better with the lower tRD of 6 at 445FSB in comparison to a tRD setting of 7 at 500FSB. However, WinRAR shows a different result with the 8x multiplier delivering better scores. Given that WinRAR depends a lot on memory bandwidth, that result is not too surprising. In additional application testing across several games and video/audio programs, we generally found the 9x multiplier scored better - sometimes in a measurable fashion - while always remaining stable.

Originally published at https://www.anandtech.com/show/2458 (Wayback Machine).