Intel X38 Tango - Is High FSB Overclocking Worth It?
- Posted in
- CPUs
E8500 FSB/VMCH Polka Party
![]() |
The voltages shown in these tables are the minimum we can expect to use to keep each configuration completely stable. Games like Crysis represent one of the toughest system loads we have ever seen from a program. The redline E8500 results at 500 FSB are not completely stable due to Crysis, even though we can pass a myriad of other stress tests.
The ability to run other games and video/audio/office applications generated a mixed bag of results, but these same applications ran perfectly fine at the 9x/9.5x multipliers. However, we would recommend the 9x multiplier for everyday operation as the voltages required (plus increased thermal outputs) to ensure stability at the 9.5x multiplier are a greater penalty than the very slight increases in application performance.
![]() |
We also checked the overclocking ability of the Maximus Extreme with 4GB of memory. The total load capacitance of four memory modules limits the X38 chipset to a 2N command rate over DDR3-1600 speeds at CAS 7. A slight bump in VMCH is required to hold things together with 4GB of memory in comparison to 2GB.
Now that we have this base data, let's take a quick look at why using a tRD setting of 6 in the 440-470FSB region makes so much sense with dual-core CPUs like the E8400/E8500.
Originally published at https://www.anandtech.com/show/2458 (Wayback Machine).

