Intel X38 Tango - Is High FSB Overclocking Worth It?
- Posted in
- CPUs
E6850 and VMCH/FSB/tRD do the Disco
![]() |
6x548FSB
![]() |
7x544FSB
![]() |
7x548FSB
![]() |
8x500FSB
![]() |
9x445FSB
![]() |
We ran a series of quick stability tests using OCCT. Although OCCT will pass at a speed of 6X548 FSB with as little as 1.41VMCH, stepping up to the 7x multiplier requires a significant increase in MCH voltage. Interestingly enough, backing off a mere 4MHz on the FSB (to 544MHz) brings the MCH voltage down to 1.54V.
Using anything beyond 544 FSB requires an absolute brute force approach to get the board stable enough to generate more than a few screenshots. Lower multiplier locked CPUs will naturally need these higher FSB speeds to acquire high processor overclocks to match CPUs with higher or unlocked multipliers.
This is assuming the processor itself is capable of running high FSB speeds, and finding those is about as tough as doing the foxtrot with a Sumo wrestler. Let's move over to the E8500 and see what happens to the achievable FSB rates. We will also compare performance points between multipliers and FSB speeds.
Originally published at https://www.anandtech.com/show/2458 (Wayback Machine).





