Archive 1997–2024

Silver Power Blue Lightning 600W

Test Setup

As usual we are testing with our Chroma programmable loads to fully load each rail to a specific amount. This is important to get truly accurate results and not merely approximate values. The tests are conducted in two different temperature environments. One is normal room temperature of 25-26°C, while the second environment goes from room temperature and increases steadily up to 50°C. Especially during the higher temperatures we will see how good the power supplies are and what they're really made of. Components inside will perform much worse at higher temperatures, but we expect any good quality PSU to deal with such test conditions without failing.

Note: If you would like to know more about our testing methodology, equipment, and environment, please read our PSU testing overview.

DC Outputs
PSU Load 3.3V 5V 12V1 12V2 Wattage
(All Rails)
10% 1.42A 1.78A 1.89A 1.89A 61.5W
20% 2.85A 3.56A 3.78A 3.78A 122.5W
50% 7.12A 8.90A 9.44A 9.44A 301.0W
80% 11.39A 14.24A 15.11A 15.11A 472.5W
100% 14.24A 17.79A 18.88A 18.88A 578.0W

3.3V DC Output


The 3.3V rails were stable during testing, as usual showing a constant drop under increasing load. At maximum loads, the 3.3V rail does go out of spec, regardless of temperature. However, the consistency of the rail outputs regardless of temperature and input voltage is surprising, with all four test results paralleling each other.

5.0V DC Output


Results with the 5V rail are similar to the 3.3V rail. All four test cases parallel each other, dropping steadily under increasing load. At about 90% load, the 5V rail falls out of spec. It is unlikely that most users will put anywhere near a 90% load on a 600W power supply, and provided you stay below 80% load on the 3.3V and 5V rails there shouldn't be any problems.

5Vsb Output



12V DC Output



By far the most important rails on any power supply are the 12V rails. Unlike the 3.3 and 5V rails, the Silver Power Blue Lightning delivers a good, stable output on the 12V rails regardless of load. Again, the 12V outputs are very similar regardless of input voltage or temperature, and both rails are also nearly identical.

Originally published at https://www.anandtech.com/show/2308 (Wayback Machine).