Silver Power Blue Lightning 600W
- Posted in
- Cases/Cooling/PSUs
Internals, Continued


The heat sinks have been designed for cooling by the 120mm fan that will be located directly below them. The large horizontal area will absorb most of the airflow and dissipate heat quite well. However, there's not much space between the fins which means that very little air will cool the area below the heat sinks. The heatsinks should stay cool, but they end up acting as an umbrella for the rest of the components.


The temperature diode is attached to one end of the secondary heatsink. The temperature sensor can be attached to a variety of locations that all work well, and there's certainly no problem with this location.

All of the secondary capacitors are also manufactured by Teapo.


The heat sinks have been designed for cooling by the 120mm fan that will be located directly below them. The large horizontal area will absorb most of the airflow and dissipate heat quite well. However, there's not much space between the fins which means that very little air will cool the area below the heat sinks. The heatsinks should stay cool, but they end up acting as an umbrella for the rest of the components.


The temperature diode is attached to one end of the secondary heatsink. The temperature sensor can be attached to a variety of locations that all work well, and there's certainly no problem with this location.

All of the secondary capacitors are also manufactured by Teapo.
Originally published at https://www.anandtech.com/show/2308 (Wayback Machine).