Silver Power Blue Lightning 600W
- Posted in
- Cases/Cooling/PSUs
Standby Efficiency


The standby efficiency results are not particularly noteworthy, other than pointing out that power consumption is very low when there is no load placed on the power supply. We measured just 0.6W with 115VAC and 1.07W with 230VAC, which is a pretty good result.
Efficiency

When it comes to efficiency, the Blue Lightning 600W quite frankly blew our socks off. By all appearances, this is your everyday midrange power supply... we simply could not believe getting efficiency results as high as 85%! In fact, the efficiency is above 80% over almost the entire range which can not only save money on electrical costs but is also generally a good indicator of power supply quality. European users (and the other 230VAC countries) will get above 80% efficiency with loads ranging from 60W all the way up to 600W, while 115VAC users will get above 80% up until about 500W.
PFC

The Power Factor Correction was a bit unusual with this power supply. We're used to seeing nice curves at 100VAC and 115VAC, but the 115VAC doesn't rise as quickly as were used to seeing. It's only at 30% and above that the curve begins to rise, but then it stops again at around 60% load and stays at 0.986. 230VAC even starts to drop slightly at maximum load. This isn't an ideal result, but at the same time PFC isn't necessarily one of the most critical factors in determining power supply quality.


The standby efficiency results are not particularly noteworthy, other than pointing out that power consumption is very low when there is no load placed on the power supply. We measured just 0.6W with 115VAC and 1.07W with 230VAC, which is a pretty good result.
Efficiency

When it comes to efficiency, the Blue Lightning 600W quite frankly blew our socks off. By all appearances, this is your everyday midrange power supply... we simply could not believe getting efficiency results as high as 85%! In fact, the efficiency is above 80% over almost the entire range which can not only save money on electrical costs but is also generally a good indicator of power supply quality. European users (and the other 230VAC countries) will get above 80% efficiency with loads ranging from 60W all the way up to 600W, while 115VAC users will get above 80% up until about 500W.
PFC

The Power Factor Correction was a bit unusual with this power supply. We're used to seeing nice curves at 100VAC and 115VAC, but the 115VAC doesn't rise as quickly as were used to seeing. It's only at 30% and above that the curve begins to rise, but then it stops again at around 60% load and stays at 0.986. 230VAC even starts to drop slightly at maximum load. This isn't an ideal result, but at the same time PFC isn't necessarily one of the most critical factors in determining power supply quality.
Originally published at https://www.anandtech.com/show/2308 (Wayback Machine).