The Enermax Liberty - Getting long in the tooth, but still worth a look
- Posted in
- Cases/Cooling/PSUs
Testing
As usual we are testing with our Chroma programmable loads to fully load each rail to a specific amount. This is important to get truly accurate results and not merely approximate values. The tests are conducted in two different temperature environments. One is normal room temperature of 25-26°C, while the second environment goes from room temperature and increases steadily up to 50°C. Especially during the higher temperatures we will see how good the power supplies are and what they're really made of. Components inside will perform much worse at higher temperatures, but we expect any good quality PSU to deal with such test conditions without failing.
Note: If you would like to know more about our testing methodology, equipment, and environment, please read our PSU testing overview.
3.3V DC Outputs

The 3.3V rail starts at 3.4V and drops steadily with increasing load like we usually experience. Heat doesn't seem to have a great impact on the components since the voltage drop looks similar with any input voltage at any temperature. The voltage held stable within regulations and have been only close to the limit with the highest load.
5V DC Outputs

The 5V rail also starts at a high amount just like the 3.3V rail. The drop is almost constant and within specification.
As usual we are testing with our Chroma programmable loads to fully load each rail to a specific amount. This is important to get truly accurate results and not merely approximate values. The tests are conducted in two different temperature environments. One is normal room temperature of 25-26°C, while the second environment goes from room temperature and increases steadily up to 50°C. Especially during the higher temperatures we will see how good the power supplies are and what they're really made of. Components inside will perform much worse at higher temperatures, but we expect any good quality PSU to deal with such test conditions without failing.
Note: If you would like to know more about our testing methodology, equipment, and environment, please read our PSU testing overview.
3.3V DC Outputs

The 3.3V rail starts at 3.4V and drops steadily with increasing load like we usually experience. Heat doesn't seem to have a great impact on the components since the voltage drop looks similar with any input voltage at any temperature. The voltage held stable within regulations and have been only close to the limit with the highest load.
5V DC Outputs

The 5V rail also starts at a high amount just like the 3.3V rail. The drop is almost constant and within specification.
Originally published at https://www.anandtech.com/show/2289 (Wayback Machine).