Archive 1997–2024

The Enermax Liberty - Getting long in the tooth, but still worth a look

Standby Efficiency

Standby Efficiency - 115VAC

Standby Efficiency - 230VAC

In standby mode which applies no load at all to the 5Vsb rail the Liberty uses 0.36-0.87W which is a much better result than what we've seen with other recent PSUs, for example at the previous review of the Gigabyte unit. We have to add that our standby mode is not directly comparable with reality because the mainboard always uses a little bit of power. Therefore we test the standby efficiency with different loads to see how efficient it is when a PC is switched off.

5Vsb DC Outputs




The Liberty has a very good standby efficiency as we can see from the above graphs. The voltage on the 5Vsb rail decreases steadily up to the highest load, which shouldn't be surprising to anyone anymore. It never exceeds specifications and therefore shouldn't cause any trouble. With a 230VAC input, it does fall below spec at the maximum load, but that's a pretty unlikely scenario and shouldn't cause any difficulties regardless.

Originally published at https://www.anandtech.com/show/2289 (Wayback Machine).