The Single 12V Rail SilverStone Olympia OP650
- Posted in
- Cases/Cooling/PSUs
The Inside
After opening the housing we are presented with a very clean and systematic arrangement of components. Firstly, the two big heatsinks reveal the first signs of the old Etasis crew. In the most recent designs from Etasis, we find power supplies built with two printed circuit boards that still fit into a standard sized housing. This was made possible through the selection of components which are very short.

The same is clearly visible on first sight in our Silverstone Olympia power supply. Where other manufacturers are using a big capacitor on the primary section, Silverstone designed their PSU using three smaller ones to fit under the massive heatsink. The second difference to most other power supplies is that there are three transformers in the middle of the PCB. Normally this is implemented with one big transformer used to generate all outputs to the PC and a smaller transformer to generate the 5v stand-by rail.
Filtering stage

The filtering stage is taken really seriously in the OP650. We found an EMI-filter which is basically there to prevent interferences from the power supply going back into the AC source. The three yellow blocks between the ferrite coils are called X-capacitors and the Y-caps are positioned on the far right side under the heatsinks. Beside this is the rectifier bridge which converts the alternating current into direct current. Silverstone placed it direct on the primary heatsink in order to help dissipate the heat generated by the rectifier.

After opening the housing we are presented with a very clean and systematic arrangement of components. Firstly, the two big heatsinks reveal the first signs of the old Etasis crew. In the most recent designs from Etasis, we find power supplies built with two printed circuit boards that still fit into a standard sized housing. This was made possible through the selection of components which are very short.

The same is clearly visible on first sight in our Silverstone Olympia power supply. Where other manufacturers are using a big capacitor on the primary section, Silverstone designed their PSU using three smaller ones to fit under the massive heatsink. The second difference to most other power supplies is that there are three transformers in the middle of the PCB. Normally this is implemented with one big transformer used to generate all outputs to the PC and a smaller transformer to generate the 5v stand-by rail.
Filtering stage

The filtering stage is taken really seriously in the OP650. We found an EMI-filter which is basically there to prevent interferences from the power supply going back into the AC source. The three yellow blocks between the ferrite coils are called X-capacitors and the Y-caps are positioned on the far right side under the heatsinks. Beside this is the rectifier bridge which converts the alternating current into direct current. Silverstone placed it direct on the primary heatsink in order to help dissipate the heat generated by the rectifier.

Originally published at https://www.anandtech.com/show/2275 (Wayback Machine).