Archive 1997–2024

The Single 12V Rail SilverStone Olympia OP650

Primary Side



The primary side includes the PFC stage. It is mostly constructed with its own printed circuit board containing the PFC silicon (active PFC). Some power supplies have microchips with a combined PFC and PWM control which is important for the secondary stage. This power supply, however, is built with a single active PFC chip on the extra PCB.

Like we mentioned earlier, there are three small main caps on the primary side instead of only one big one. They are separately rated with 150µF and built by Hitachi. This company is used by many other manufacturers as well. The last shot shows the rectifier bridge on the far right side directly connected to the heatsink.





The Transformers



As mentioned before, Silverstone is using two main transformers in this power supply. We have seen this in several other power supplies from Tagan and Cooler Master. But just because a two transformer design is used by more than one manufacturer doesn't mean they're all created equal. There are several ways in which transformers can output different rails. You can, for example, let the one transformer generate several 12v rails and the second one does the 5v and another 12v rail. Or let one transformer generate only one 12v rails and everything else on the second one. The 3.3v rail is, in every case we've seen, generated with a voltage divider from the 5v rail. This is also done with the negative 12v rail from one of the positive 12v rails. Silverstone is running the two transformers in tandem to provide all rails simultaneously.

Originally published at https://www.anandtech.com/show/2275 (Wayback Machine).