Archive 1997–2024

The Single 12V Rail SilverStone Olympia OP650

Cables and Connectors

All cables extending out from the power supply are sleeved up to the first connector. After the first connector the cables are left without. Here Silverstone tries to save some cash since it is not easy (and therefore expensive) to sleeve the cables after the first connector. The yellow cables are marked with different colors as is done with PSUs having more than two 12v rails. Indeed we will see more evidence of this later: the PCB Silverstone used in this power supply was originally designed with four separated 12v rails.





The cables have a minimum length of about 20" and connectors are spaced at about 5". The OP650 has two 6-pin PEG connectors which enables it to run a decent SLI or Crossfire system. In addition there is an 8-pin PEG connectors which is necessary for PCIe v2.0 compliant graphics cards requiring more than 225W of power (like the AMD Radeon HD 2900 XT with overdrive enabled). The six SATA and four 4-pin drive connectors are definitely enough to run a high-end system.

Originally published at https://www.anandtech.com/show/2275 (Wayback Machine).