Archive 1997–2024

Thermalright Ultra 120: Elegant, Fanless and Efficient Cooling

Overclocking

As cooling solutions do a better job of keeping the CPU at a lower temperature, it is reasonable to expect the overclocking capabilities of the CPU will increase. In each test of a cooler we measure the highest stable overclock of a standard X6800 processor under the following conditions:

CPU Multiplier: 14x (Stock 11x)
CPU voltage: 1.5875V
FSB Voltage: 1.30V
Memory Voltage: 1.90V
nForce SPP Voltage: 1.35V
nForce MCP Voltage: 1.7V
HT nForce SPP <-> MCP: Auto

Memory is set to Auto timings on the 680i and memory speed is linked to the FSB for the overclocking tests. This removes memory as any kind of impediment to the maximum stable overclock. Linked settings on the 680i are a 1066FSB to a DDR2 memory speed of DDR2-800. As FSB is raised the linked memory speed increases in proportion. The same processor is used in all cooling tests to ensure comparable results.

Highest Stable Overclock (MHz)

The Thermalright Ultra 120 with the Scythe S-Flex fan matched the Tuniq Tower 120 at 3.90GHz. This is the highest stable overclock we have reached on air cooling with this CPU. While we could boot at speeds as high as 3.96GHz, gaming performance was not stable at speeds higher than 3.90GHz. Increasing the CPU voltage also did not increase stability above 3.90GHz.

The best coolers tested have topped out at 3.90GHz. This represents the highest stable overclock that has been achieved with this CPU with air cooling. While we will continue to try to push the better coolers even further than 3.90Ghz, it is fair to conclude that the maximum OC on air with this processor is likely 3.90GHz. The Vigor Monsoon II achieved a higher overclock, but only with Thermal Electric Cooling.

Originally published at https://www.anandtech.com/show/2185 (Wayback Machine).