Archive 1997–2024

DFI CFX3200-DR: ATI RD580 Tweak Attack

Overclocking

Maximum overclock data was added to our performance graphs to allow a visual comparison of the overclocking capabilities of tested boards. The values represent the highest stable overclock achieved with a standardized air-cooling setup on an AMD 4000+ CPU. For more details on the specific overclocking abilities of a specific board please refer to the Overclocking and Memory Stress Test section of individual board reviews.

Overclocking - A64 4000+ (Clawhammer)


Overclocking


The overclocking performance of the DFI CFX3200-DR was what we have come to expect from DFI, in a word outstanding. Overclocking reached 315 at a 1T Command Rate at the reduced multiplier. We were able to run SuperPI and all 3D tests at the 315 setting without crashes. While this is not the highest overclock we have ever achieved, we consider boards that reach 300 or above to be essentially the same in our tests. As memory has moved from Samsung TCCD in 512MB DIMMs to other memory chips in 1GB DIMMs, the DDR overclock needs have moved downward. Any board that can do 280 or so at a reduced multiplier can probably run a current 2GB DDR memory kit at the fastest "1:1" speeds it can achieve.

Note that we don't conduct extensive testing at reduced memory multipliers, due to time constraints. It is possible that boards will reach higher HTT bus speeds with lowered memory bandwidth, and that's something we've discussed in a couple socket 939 overclocking articles. Lower memory ratios are particularly useful when using 1GB DDR DIMMs or when simply trying to increase CPU speed while using value RAM. In general, higher CPU speeds have more of an impact on AMD socket 939 system performance than increased memory bandwidth or lower timings. Balancing timings, memory bandwidth, and CPU speed to achieve maximum performance is something that requires a lot of time and testing for each individual CPU/system. However, with AM2 around the corner the performance/overclocking rules will change again.

Performance at the stock 12X multiplier matched the highest stock overclock of 246 we have tested with this CPU. This is more a test of the limits of this CPU than a test of the overclocking capabilities of the motherboard. Having said that, only a very few boards can squeeze this highest 246 from our test CPU, so performance in this test does reflect the stability of the board as an overclocking platform. Both results are among top of our overclocking results charts. We would expect nothing less from this DFI board. It is possible even higher overclocks can be achieved on air by those who are willing to master the huge array of tweaks on this DFI CFX3200-DR. Frankly we could have spent weeks exploring all the combinations of adjustments that can be achieved. This incredible array of options will likely make setup guides for the DFI CFX3200 some of the most popular articles on overclocking Forums.

Originally published at https://www.anandtech.com/show/2002 (Wayback Machine).