DFI CFX3200-DR: ATI RD580 Tweak Attack
- Posted in
- Motherboards
CrossFire Gaming Performance
The RD580 chipset brings ATI Dual X16 CrossFire video to the marketplace, so both the major players in the video market now have flagship dual X16 solutions. SLI and CrossFire are about gaming, so CrossFire tests were confined to gaming benchmarks, and the test suite is heavily slanted to recent and popular titles where SLI and CrossFire make the biggest difference.However, the practical reality today is that NVIDIA SLI only works on NVIDIA boards, and ATI CrossFire works on ATI and Intel boards. This limits our ATI Dual X16 testing to CrossFire. All CrossFire testing was at 1600x1200, 4X AA, and 8X AF. Tests were also run with a single X1900XT at this same resolution. The single video results are included for reference in the results for each game. Single video results on the DFI CFX3200 are in Orange and the DFI CrossFire results are in Red.






With 4X AA and 8X AF turned on at 1600x1200 resolution, CoD2, SS2, HL2LC and SCCT all show huge performance gains with CrossFire. There are smaller, but still significant gains with F.E.A.R. in CrossFire. However, look closely and you will see that Far Cry shows no improvement at all with a CrossFire platform compared to a single X1900XT, showing that this older title is CPU limited with the latest graphics cards. The DFI CFX3200 was generally a very good performer in CrossFire mode, topping the comparisons in most benchmarks. After all the early issues with the RDX200 and CrossFire this should be welcomed news for potential buyers.
We complained about ATI's CrossFire interface in our last CrossFire review, and it still remains clumsy and anything but intuitive. To use CrossFire you MUST install Catalyst Control Center. If CCC is not installed CrossFire will not work. Since many users don't install CCC (due to the large memory footprint and an interface that quite a few people dislike), this is not an ideal solution for CrossFire. Once CCC drivers are installed, you must also get the latest DirectX update from Microsoft - at least the February 2006 update is required, or you won't get the CrossFire tab in CCC. Then you must go into CCC, select the CrossFire tab and enable the feature.
This is a MANUAL procedure - there is no warning at all that you have a CrossFire capable board or that you have to go into CCC to enable CrossFire. NVIDIA notifies you that an SLI-capable system is installed and prompts you to enable SLI. There is no alert at all with ATI. The only clue you will have that CrossFire is NOT turned on is the poor performance results. THEN you start looking for what's wrong. ATI really needs to fix this issue; CrossFire performance is very good, but it would be much nicer if ATI made it easier to turn on CrossFire, as well as providing a clear way to determine that CF is functioning properly (a la NVIDIA's "Show GPU load balancing" option).
Originally published at https://www.anandtech.com/show/2002 (Wayback Machine).