Archive 1997–2024

Intel 945P Motherboards: Going from Hopeless to Enthusiastic

ASUS P5LD2 Deluxe: Overclocking

FSB Overclocking Results

Front Side Bus Overclocking Testbed
Processor: Pentium 4 Prescott LGA 775
820 Dual Core 2.8GHz
CPU Voltage: 1.4500V (1.3000V default)
Memory Settings: 3-2-2-8 at 667MHz
Memory Voltage: 2.2V
NorthBridge Voltage: 1.55V
SouthBridge Voltage: 1.05V
Cooling: Intel 840EE Heat Sink
Power Supply: OCZ Power Stream 520
Maximum CPU OverClock: 267fsb x 14 (3739MHz) +34%

This board is an excellent overclocker, considering that our previous best FSB x 14 was at 253 on the Asus P5N32-SLI. At this overclock setting, the system was able to complete all of our benchmark test suites and also run Prime95 and SuperPI without issue. We were able to overclock the FSB to 275 at the14x multiplier, which resulted in CPU operation of 3850MHz, but we were unable to complete the benchmark test suite. However, even at this setting, the board was stable enough to complete most of the gaming benchmarks.

Memory Stress Tests

Memory stress tests look at the ability of the Asus P5LD2 Deluxe to operate at the officially supported memory frequencies of 667MHz DDR2 at the best performing memory timings that the Corsair CM2X512A-5400UL revision 1.3 will support.

Asus P5LD2 Deluxe
Stable DDR667 Timings - 2 DIMMs
(2/4 slots populated - 1 Dual-Channel Bank)
Clock Speed: 200MHz (800FSB)
Timing Mode: 667MHz - Default
CAS Latency: 3
RAS to CAS Delay: 2
RAS Precharge: 2
RAS Cycle Time: 8
Voltage: 2.1V

The Asus P5LD2 Deluxe was completely stable with 2 DDR2 modules in Dual-Channel at the settings of 3-2-2-8 at 2.1V.

We will now install all four available memory slots, which are usually more strenuous on the memory subsystem than testing 2 DDR2 modules on a motherboard.

Asus P5LD2 Deluxe
Stable DDR667 Timings - 4 DIMMs
(4/4 slots populated - 2 Dual-Channel Banks)
Clock Speed: 200MHz (800FSB)
Timing Mode: 667MHz - Default
CAS Latency: 3
RAS to CAS Delay: 3
RAS Precharge: 3
RAS Cycle Time: 8
Voltage: 2.15V

The Asus P5LD2 Deluxe was completely stable with 4 DDR2 modules in Dual-Channel at the settings of 3-3-3-8 and only needed the voltage increased to 2.15V. This is an excellent accomplishment and truly shows Asus's engineering capability.

Originally published at https://www.anandtech.com/show/1857 (Wayback Machine).