Archive 1997–2024

SilverStone SG01B

Installation (cont’d)

Looking at the case in the same state from the other side, we can see that routing the cables from the front panel to the motherboard could be really tricky if one would install two hard drives in the cage. We found that it’s actually easiest to go under both drives, but it could be different for other motherboards.


Click to enlarge.

One can also see that there’s still a decent amount of space between our Zalman CPU cooler and the bottom of the power supply support, which is good news for anyone with a larger-than-normal heatsink.


Click to enlarge.

After taking the casing off, which holds the exhaust fan in place, we secured our AGP Radeon video card to the case and then proceeded to install our PSU. We must comment that working in a case this compact makes little features like modular power supply very desirable.


Click to enlarge.

After getting most of the cables routed, we then put in our CD-R / DVD combo drive and were pleased to find that even with a full-sized power supply, we really didn’t run out of space in the SG01. This is definitely one area where the SG01 is nicer than the X-QPack, so if your needs require a standard power supply, the SG01 should probably be one of your main choices.


Click to enlarge.

Some of the cable routing is tricky indeed, and anything that can help reduce the need for excess cables is definitely a plus, but all things considered, the SG01 wasn’t a difficult case in which to get our test bed.


Click to enlarge.

Our last shot of the right side of the case really shows how one can run into serious problems if too many cables are needed for a particular setup.


Click to enlarge.


Originally published at https://www.anandtech.com/show/1835 (Wayback Machine).