SilverStone SG01B
- Posted in
- Cases/Cooling/PSUs
Benchmarking - Thermal
To test the case’s ability to keep temperatures of key components in check, we installed our standard micro ATX test bed, using a MadDog Sure Power 550 watt power supply, along with a CD/DVD combo drive into the top 5.25” bay.
For the same reasons as the X-QPack, it was both difficult and somewhat pointless to do an inch-by-inch analysis of ambient air temperatures, but after leaving the system running for a while and waiting for our thermometers to settle, we recorded the exhaust air at 33.7 degrees Celsius from the 60mm fan, and 34.2 degrees from the power supply exhaust. The SG01 was tested in a room with an ambient temperature of 23.0 degrees, which means that this case certainly didn’t keep the components as cool as competing cases, but it wasn’t letting dangerously hot either. Keep in mind that the figure of the 60mm fan exhaust is the one to use when considering the ambient air temperature inside the case, as the extra heat generated by the power supply is not a factor. Here’s a look at how the SG01 did at keeping the components cool in comparison to our previous reviewed Aspire Micro ATX case:
All in all, these aren’t terrible numbers, given the case’s size, and the hard drive especially is being kept nice and cool. However, the video card is a full five degrees warmer in this case than in the X-QPack under full load, and the CPU is also not having as much warm air taken away from it. Unfortunately, this is all simply the end result of a decision to only use a single small exhaust case fan, and if it wasn’t for the four-fan power supply, these numbers might have been quite a bit worse.
To test the case’s ability to keep temperatures of key components in check, we installed our standard micro ATX test bed, using a MadDog Sure Power 550 watt power supply, along with a CD/DVD combo drive into the top 5.25” bay.
| HTPC Micro ATX Test Bed | |
| DFI K8M800 MLV AMD Athlon 64 3200+ OCZ PC3200 512MB DDR x 2 Zalman CNPS7000 Copper Western Digital IDE Hard Disk Sapphire 9800XT AGP8x |
![]() Click to enlarge. |
For the same reasons as the X-QPack, it was both difficult and somewhat pointless to do an inch-by-inch analysis of ambient air temperatures, but after leaving the system running for a while and waiting for our thermometers to settle, we recorded the exhaust air at 33.7 degrees Celsius from the 60mm fan, and 34.2 degrees from the power supply exhaust. The SG01 was tested in a room with an ambient temperature of 23.0 degrees, which means that this case certainly didn’t keep the components as cool as competing cases, but it wasn’t letting dangerously hot either. Keep in mind that the figure of the 60mm fan exhaust is the one to use when considering the ambient air temperature inside the case, as the extra heat generated by the power supply is not a factor. Here’s a look at how the SG01 did at keeping the components cool in comparison to our previous reviewed Aspire Micro ATX case:
| Component Temperatures | ||
| SG01 | X-QPack | |
| Exhaust Air | 33.7 C | 28.3 C |
| CPU | 34 / 47 C | 32 / 44 C |
| GPU | 53 / 69 C | 49 / 64 C |
| HDD | 29 C | 30 C |
| Northbridge | 36 C | 34 C |
| Power Supply | 32 C | 32 C |
All in all, these aren’t terrible numbers, given the case’s size, and the hard drive especially is being kept nice and cool. However, the video card is a full five degrees warmer in this case than in the X-QPack under full load, and the CPU is also not having as much warm air taken away from it. Unfortunately, this is all simply the end result of a decision to only use a single small exhaust case fan, and if it wasn’t for the four-fan power supply, these numbers might have been quite a bit worse.
Originally published at https://www.anandtech.com/show/1835 (Wayback Machine).
