Archive 1997–2024

SilverStone SG01B

Cooling and Construction

Without an included power supply, the rear 60mm and the hard drive cage 80mm make up the only included active cooling parts of the SG01. As mentioned before, there is the option to add another 60mm at the top. But, we really must admit that we’re not wild about the idea of several smaller fans, as they still probably won’t provide nearly as much total air flow as a single large fan such as the X-QPack’s 120mm. They most certainly won’t be as quiet, either.

Speaking of the fans, the rear 60mm fan must be removed to get at the expansion card mounting screws, which although isn’t difficult, does require an additional step.


Click to enlarge.

In regards to construction, the SG01 certainly looks sturdier than many competing cases, thanks in no small part to its monolithic front panel - but is this really the case?

The main crossbar of the case is a bit bulkier and is secured by more screws, but in comparison to the X-QPack’s trio of crossbars, the SilverStone case doesn’t have quite as solid of a feel to it. The workmanship and quality of aluminum is awesome, however, and each part really seems to be made very well.

Another annoyance that we had with this unit, however, was the fit of the triple-side panel. Taking a closer look at this picture of the right side of the chassis, we can see that it’s not actually fitting right at all.


Click to enlarge.

Now, while this certainly doesn’t imply that one can never get the cover to fit perfectly, we still feel that it’s worthy to mention, since it can be pretty frustrating to have to wrestle with something like the case cover.

Originally published at https://www.anandtech.com/show/1835 (Wayback Machine).