SilverStone SG01B
- Posted in
- Cases/Cooling/PSUs
Internal Design (cont’d)
The included cables are comprised of pretty much everything that one would expect: power and reset buttons, HDD activity and power LEDs, and the front panel port cluster. Luckily, all the cables for the front port cluster are long enough to ward off any potential routing problems. This shot also shows that the front bay covers for the 5¼” drives are held in place by screws, which is certainly nicer than punch-out steel that almost always leaves behind sharp edges.
Pushing the cables aside and taking a clear look at the bottom of the SG01 reveals the motherboard mounting points as well as the protrusions that secure the hard drive cage.
While it certainly isn’t difficult, there is a bit of a trick to getting the cage in and out, but after doing it several of times, you get the hang of it pretty quickly. Here’s the cage with an installed drive in close detail.
While the X-QPack didn’t offer more than two drives in its cage, it did have a dedicated 3½” bay, which could hold an external or internal drive. The good news is that the SG01 puts a little more clearance between the two drives in the cage, which along with the dedicated, targeted cooling should help keep the drives quite a bit cooler in this enclosure.
The included cables are comprised of pretty much everything that one would expect: power and reset buttons, HDD activity and power LEDs, and the front panel port cluster. Luckily, all the cables for the front port cluster are long enough to ward off any potential routing problems. This shot also shows that the front bay covers for the 5¼” drives are held in place by screws, which is certainly nicer than punch-out steel that almost always leaves behind sharp edges.
Pushing the cables aside and taking a clear look at the bottom of the SG01 reveals the motherboard mounting points as well as the protrusions that secure the hard drive cage.
While it certainly isn’t difficult, there is a bit of a trick to getting the cage in and out, but after doing it several of times, you get the hang of it pretty quickly. Here’s the cage with an installed drive in close detail.
While the X-QPack didn’t offer more than two drives in its cage, it did have a dedicated 3½” bay, which could hold an external or internal drive. The good news is that the SG01 puts a little more clearance between the two drives in the cage, which along with the dedicated, targeted cooling should help keep the drives quite a bit cooler in this enclosure.
Originally published at https://www.anandtech.com/show/1835 (Wayback Machine).



