SilverStone SG01B
- Posted in
- Cases/Cooling/PSUs
Internal Design
Thumbscrews would have been nice on the SG01, but considering that there are a lot of normal screws which hold the system together, one would have to have a screwdriver handy to work on this case, so it’s not too big of a problem.
This shot here gives a pretty good idea what one will see after opening the SG01. The first thing that became more apparent to us after opening the case is that the choice to place the optical drive bays on the same side as the power supply doesn’t seem to make much sense, as we thought that this would make it more cramped inside the case.
Visible in both of the last two pictures is a space for an additional 60mm fan to be mounted at the top of the case near the side, which is probably designed to aid in the cooling of hotter video cards. In this second shot, we can also see a second support bracket for the power supply, which is a good idea since heavier supplies could put a lot of strain on the rear panel.
Looking at the case from the other side, we see that the largest included fan in the SG01 is actually situated by the hard drive cage. The decision to put the hard drives on the bottom might create cable clutter, but considering that this case doesn’t offer any windows, this is only a problem if it also impedes air flow and causes temperatures to rise.
Like the X-QPack, SilverStone had to get creative with the SG01 to fit everything into such a small package and still make it possible for a user to install and remove components without too much difficulty. This case uses slightly more removable parts to tackle the job, and because of this, there is quite a bit of free space in the SG01 after taking everything out.
Thumbscrews would have been nice on the SG01, but considering that there are a lot of normal screws which hold the system together, one would have to have a screwdriver handy to work on this case, so it’s not too big of a problem.
This shot here gives a pretty good idea what one will see after opening the SG01. The first thing that became more apparent to us after opening the case is that the choice to place the optical drive bays on the same side as the power supply doesn’t seem to make much sense, as we thought that this would make it more cramped inside the case.
Visible in both of the last two pictures is a space for an additional 60mm fan to be mounted at the top of the case near the side, which is probably designed to aid in the cooling of hotter video cards. In this second shot, we can also see a second support bracket for the power supply, which is a good idea since heavier supplies could put a lot of strain on the rear panel.
Looking at the case from the other side, we see that the largest included fan in the SG01 is actually situated by the hard drive cage. The decision to put the hard drives on the bottom might create cable clutter, but considering that this case doesn’t offer any windows, this is only a problem if it also impedes air flow and causes temperatures to rise.
Like the X-QPack, SilverStone had to get creative with the SG01 to fit everything into such a small package and still make it possible for a user to install and remove components without too much difficulty. This case uses slightly more removable parts to tackle the job, and because of this, there is quite a bit of free space in the SG01 after taking everything out.
Originally published at https://www.anandtech.com/show/1835 (Wayback Machine).



