SilverStone SG01B
- Posted in
- Cases/Cooling/PSUs
External Design (cont’d)
Taking a look at the SilverStone case from other angles, we find again that the case is much simpler than the X-QPack, and certainly as sleek as most Shuttles.
Venting holes along the entire bottom of both sides provide the exhaust fans with enough cool intake air to keep the entire system cool. This is quite a bit different from the X-QPack, which only allowed air to come in at the front of the case. It will be interesting to see how this affects the cooling performance between the two cases.
Instead of showing an empty case as we normally do, we decided to give our readers a better idea of what a completed system might look like by showing a shot of the back with our test bed installed. Like the X-QPack, the cover of the SG01 is a single piece, and is secured to the rest of the chassis with four screws (one of which has been removed in this picture). However, right away, we also notice that the cases take a very different approach to the layout of the back, as the SG01 places the power supply to the far left and a much smaller 60mm fan located above the expansion cards.
Taking a look at the SilverStone case from other angles, we find again that the case is much simpler than the X-QPack, and certainly as sleek as most Shuttles.
Venting holes along the entire bottom of both sides provide the exhaust fans with enough cool intake air to keep the entire system cool. This is quite a bit different from the X-QPack, which only allowed air to come in at the front of the case. It will be interesting to see how this affects the cooling performance between the two cases.
Instead of showing an empty case as we normally do, we decided to give our readers a better idea of what a completed system might look like by showing a shot of the back with our test bed installed. Like the X-QPack, the cover of the SG01 is a single piece, and is secured to the rest of the chassis with four screws (one of which has been removed in this picture). However, right away, we also notice that the cases take a very different approach to the layout of the back, as the SG01 places the power supply to the far left and a much smaller 60mm fan located above the expansion cards.
Originally published at https://www.anandtech.com/show/1835 (Wayback Machine).


