DFI LANParty UT RDX200: ATI’s Crossfire AMD for the Bleeding Edge
- Posted in
- Motherboards
Basic Features: DFI LANParty UT RDX200
The DFI nForce4 Ultra and SLI boards quickly developed a reputation for offering the enthusiast every imaginable BIOS option. The DFI RDX200 goes even further.
Oskar Wu, the Engineer behind DFI's legendary nForce4 series, is also the designer of this DFI RDX200. With so much already available in ATI's Reference design, Oskar concentrated on adding the "impossible" option of running 4DS DIMMs at 1T Command Rate and a working CAS 1.5 option in BIOS.
| DFI LANParty UT RDX200 | |
| CPU Interface | Socket 939 Athlon 64 |
| Chipset | ATI RD480 Northbridge - ATI SB450 Southbridge |
| Bus Speeds | 200 to 500MHz in 1MHz Increments |
| Memory Speeds | DDR200, 240, 266, 280, 300, 333, 360, 400 (433, 466, 500 with Rev. E AMD) |
| PCIe Speeds | Fixed |
| PCI/AGP | Fixed at 33/66 |
| Core Voltage | Auto, 0.8V to 1.55V in 0.025V increments PLUS 0.0V to 0.56V in 0.02V increments (Maximum vCore 2.11V) |
| CPU Clock Multiplier | 4x-25x in 0.5X increments |
| DRAM Voltage | Auto, 2.5V to 4.03V in .02V to .05V increments |
| HyperTransport Frequency | 1000MHz (1GHz) |
| HyperTransport Multiplier | Auto, 1X to 5X |
| HyperTransport (LDT) Voltage | 1.2V , 1/3V , 1.4V, 1.5V |
| Xpress 200 (NB) Voltage | 1.2V, 1/3V, 1.4V, 1.5V |
| NB Analog 1.2 Voltage | 1.2V, 1/3V, 1.4V, 1.5V |
| SB PCIe 1.8 Voltage | 1.8V, 1.9V |
| Memory Slots | Four 184-pin DDR DIMM Slots Dual-Channel Configuration Regular Unbuffered Memory to 4GB Total SUPPORTS 4 DS DIMMS AT 1T |
| Expansion Slots | 2 PCIe x16 1 PCIe x1 3 PCI Slots |
| Onboard SATA/RAID | 4 SATA Drives by SB450 (RAID 0, 1, JBOD) PLUS 4 SATA Drives by Sil 3114 |
| Onboard IDE/IDE RAID | Two Standard ATA133/100/66 (4 drives) |
| Onboard USB 2.0/IEEE-1394 | 8 USB 2.0 ports supported by SB450 2 1394 Firewire by VIA VT6307 |
| Onboard LAN | 2 Gigabit Ethernet PCIe Ethernet by Marvel 88E8053 PCI Ethernet by Marvel 88E8001 |
| Onboard Audio | Azalia HD Audio by Karajan Module with Realtek ALC882 Codec |
| BIOS Revision | Award (7/28/2005) |
The DFI nForce4 Ultra and SLI boards quickly developed a reputation for offering the enthusiast every imaginable BIOS option. The DFI RDX200 goes even further.


Oskar Wu, the Engineer behind DFI's legendary nForce4 series, is also the designer of this DFI RDX200. With so much already available in ATI's Reference design, Oskar concentrated on adding the "impossible" option of running 4DS DIMMs at 1T Command Rate and a working CAS 1.5 option in BIOS.
Originally published at https://www.anandtech.com/show/1828 (Wayback Machine).