Archive 1997–2024

915 Motherboard Roundup: Socket 775 for the Rest of Us


Gigabyte 8GPNXP Duo: Overclocking and Stress Testing

FSB Overclocking Results

Front Side Bus Overclocking Testbed
Processor: Pentium 4 Prescott LGA 775
560 ES (2.8GHz-3.6GHz)
CPU Voltage: 1.425V (1.3875V default)
Cooling: Thermaltake Jungle 502
Power Supply: OCZ Power Stream 520
Maximum CPU OverClock: 218x18 (3996MHz) +9%/td>
Maximum FSB OC: 218FSBx14 (+9%)

With the recent introduction of Intel Speedstep, overclocking an Intel 775 CPU can be done by raising the FSB at the stock multiplier or by lowering the CPU to 14X ratio and then raising the FSB more. Therefore, we ran all OC tests at the stock ratio and at the 14X Speedstep ratio. The ratio really didn't matter on the 8GPNXP-Duo as we could only reach 218 at any ratio. It appears that Gigabyte has more work to do on the 8GPnXP-Duo to get around the 10% OC lock. Since Gigabyte managed this task on the sister 915X chipset 8ANXP-D, this may still be possible with BIOS updates.

Memory Stress Test Results:

The Gigabyte can use either DDR or DDR2 memory. Benchmarks were run with DDR2 memory and a memory stress test was run to measure the ability of the Gigabyte 8GPNXP-D to operate at its officially supported memory frequency (533MHz DDR2), at the best performing memory timings that Crucial/Micron PC2-4300U will support. Memory stress testing was conducted by running DDR2 at 533MHz (stock 3:4 ratio) with 2 DIMM slots operating in Dual-Channel mode.

Stable DDR533 Timings - 2 DIMMs
(2/4 DIMMs - 1 Dual-Channel Bank)
Clock Speed: 266MHz
Timing Mode: 3:4 (200:266 - Default)
CAS Latency: 3.0
Bank Interleave: Auto
RAS to CAS Delay: 3
RAS Precharge: 3
Cycle Time (tRAS): 10*
Command Rate: N/A
*SPD (Auto) timings for DDR2 are normally 4-4-4-12 at DDR2-533. A tRAS setting of 12 is normal. We ran a series of tests to measure memory bandwidth, and found that the tRAS setting made very little difference in the performance of DDR2. The most effective range of tRAS was 8 to 13 for DDR2 on the 925X chipset, so a tRAS of 10 was chosen for benchmarking.

Like the other motherboards in this 915 roundup, the Gigabyte was completely stable with 2 DDR2 modules at the best performing settings of 3-3-3-10 at default speed and 1.8V default voltage.

Since the Gigabye can run either DDR or DDR2, but not both simultaneously, we could not test with 4 DDR2 DIMMs.

Originally published at https://www.anandtech.com/show/1561 (Wayback Machine).