Archive 1997–2024

915 Motherboard Roundup: Socket 775 for the Rest of Us


Biostar P4TGP 775: Overclocking and Stress Testing

FSB Overclocking Results


Front Side Bus Overclocking Testbed
Processor: Pentium 4 Prescott LGA 775
560 ES (2.8GHz-3.6GHz)
CPU Voltage: 1.425V (1.3875V default)
Cooling: Thermaltake Jungle 502
Power Supply: OCZ Power Stream 520
Maximum CPU OverClock: 217x18 (3996MHz) +9%
Maximum FSB OC: 217FSBx14 (+9%)

Like a few other boards in the 915 roundup, Biostar has made no changes whatsoever to open up the stock 10% OC lock that we saw on the first 915/925X boards. It really doesn't matter whether you are trying to overclock at the stock 18X multiplier or a reduced 14X ratio - the limit is 217 FSB or about 9% overclock. If you are an overclocker or would like to try your hand at overclocking in the future, the Biostar is not a good choice. It is competitive at stock speeds and very stable at a small overclock, but this is not a board that will make an overclocker happy.

Memory Stress Test Results:

The Biostar uses DDR memory to ease the transition form a current platform to Socket T. The memory stress test measures the ability of the Biostar P4TGP 775 to operate at its officially supported memory frequency (DDR400), at the best performing memory timings that OCZ OC3200 Platinum Rev. 2 will support. Memory stress testing was conducted by running DDR400 at 1:1 ratio with 2 DIMM slots operating in Dual-Channel mode.

Stable DDR400 Timings - 2 DIMMs
(2/4 DIMMs - 1 Dual-Channel Bank)
Clock Speed: 200MHz
Timing Mode: 1:1 (200:200 - Default)
CAS Latency: 2.0
Bank Interleave: Auto
RAS to CAS Delay: 2
RAS Precharge: 2
Cycle Time (tRAS): 5

The Biostar was completely stable with 2 DIMMs in Dual-Channel at the DDR timings of 2-2-2-10 at 2.6V default voltage.

Filling all four available memory slots is more strenuous on the memory subsystem than testing 2 DDR modules on a motherboard.

Stable DDR400 Timings - 4 DIMMs
(4/4 DIMMs - 2 Dual-Channel Banks)
Clock Speed: 200MHz
Timing Mode: 1:1 (200:200 - Default)
CAS Latency: 2.0
Bank Interleave: Auto
RAS to CAS Delay: 2
RAS Precharge: 2
Cycle Time (tRAS): 5

We often see boards from second tier manufacturers that have some issues when filling all memory slots on a motherboard. 4 DIMMs was not an issue for this Biostar as it handled 4 DS DIMMs at the same timings that had worked for 2 DIMMs. It appears that Biostar has paid careful attention to memory performance on the P4TGP 775 and the board performance is satisfying at stock speeds.

Originally published at https://www.anandtech.com/show/1561 (Wayback Machine).