Archive 1997–2024

Kingwin KT-424 Aluminum Case


Inside the KT-424

Unlike some other aluminum cases that we have reviewed, the aluminum construction continues inside the case throughout every structure. We immediately noticed the rubber mounts for the hard drives. Kingwin placed these rubber stoppers inside the mounting holes for each 3.5” internal bay. As we have noticed in our testing of this case, these stoppers do dampen the noise of the hard drives spinning. This upgrade adds considerably to the performance of the case at almost no cost.



Our only complaint about the hard drive mounting is the absence of any sort of removable bays. Unscrewing the hard drives requires both sides of the tower to be removed. Welcome back to the dark ages.




The KT-424 came with yet another solution for "screw less" bay mounting on the external 3.5” and 5.25” bays. These are similar to the Foxconn clips that pull forward to apply pressure on the sides of the components. As far as we can tell, these clips are durable and work well, but can inhibit your choke of fan controllers or other half length external devices. Removing the clips does not help, since there are no standard sized holes to mount something with screws.

PCI and AGP expansion bays used standard thumbscrews and metal covers. We have seen a lot of different suggestions to this design, but in our opinion, this still might be the best.

An unusual sharp edge exists up at the top, along the power supply mounting. Kingwin does not include plastic runners with the KT-424, so all edges are smoothed or folded over.

Originally published at https://www.anandtech.com/show/1129 (Wayback Machine).