Archive 1997–2024

Kingwin KT-424 Aluminum Case


Motherboard Tray



One lone 80mm exhaust fan sits on the removable motherboard tray. The KT-436 had a very stable and practical removable tray, and the KT-424 is no different. Four thumbscrews keep the tray in place; but when removed, the tray moves very fluidly along the two aluminum rails. The tray does not wobble or stick when removing.



This motherboard tray has a plethora of hard points. Almost fifty precut slots allow you to insert the included metal risers. The motherboard is screwed into these risers. We are not quite sure how many of these hard points are usable, but kudos to Kingwin for providing so many anyway.

One feature really stuck out to us. Have you ever removed your motherboard tray and had to disconnect each and every LED lead? The KT-424 includes a disconnecting lead bundle, which allows you to connect one side to the motherboard at all times. If you wish to pull the motherboard out, the bundle disconnects, rather than reseating the entire battery of tiny little pins and connectors. Again, this is one of those 10-cent solutions that end up performing their share of convenience, hundreds of times over.



The interchangeable motherboard EMI shield remains the same steel item that is included with most motherboards anyway. We hate these things. Not only because they remain the last Bastille of Pain on a case (sharp edges), but also because they are a pain to remove and put back. Although it may be a pipe dream, our hats go off to the manufacturer who can figure out how to get rid of these EMI shields.

Originally published at https://www.anandtech.com/show/1129 (Wayback Machine).