Archive 1997–2024

Kingwin KT-424 Aluminum Case


More on External Construction

Quite often, we overlook the removable panel or door to a case. Usually, we do not need to talk about this. However, once in a while, it slips by us and three months later, someone asks us, "Why did you give such a high rating to a case with a panel that I can’t remove or put back?"

Kingwin went with a very traditional panel door. The insets are oversized and the case does not produce any unnecessary complications to close or open. However, it is unusually heavy. The 8mm acrylic cutout is not flush with the rest of the panel, so the panel is slightly difficult to put back if you do not lay the case on its side.

The largest problem we have had with aluminum is its malleability. Whereas steel cases have sharp edges everywhere, aluminum cases have bent corners and creased paneling. Particularly, the side removable panels like to bend the most. The excessively think acrylic on the left side panel seems to keep the side panel from creasing, but carelessness can and will bend the right panel.



One of the more unusual little items was the carbon fiber insert along the top of the front bezel. This same insert makes itself present on almost every Lian Li case.

All external components on the case were removed with thumbscrews. The resemblance to Lian Li’s budget aluminum line is certainly present, but the inside differs greatly.

Originally published at https://www.anandtech.com/show/1129 (Wayback Machine).