Archive 1997–2024

Micron M500DC (480GB & 800GB) Review

Endurance Ratings: How They Are Calculated

One of the questions I quite often face is about the manufacturers' endurance ratings. Go back two or three years and nobody had any endurance limits in their client SSDs but every SSD released in the past year or so has an endurance limitation associated with it. Why did that happen? Let's open up the situation a bit.

A few years ago, many enterprises would just go and buy regular consumer SSDs and use them in their servers. Generally there is nothing wrong with that because there are scenarios where enterprises can get by with client-grade hardware, but the problem was that a share of the enterprises knew that the drives weren't durable enough for their needs. However, they also knew that if they wore out the drive before the warranty ran out, the manufacturer would have to replace it.

Obviously that wasn't very good business for the manufacturers because for one drive sold, more than one had to be given away for free. At the same time less customers were buying the more expensive, high profit enterprise drives. Without disrupting the client market by either increasing prices or reducing quality, the manufacturers decided to start including a maximum endurance rating, which would invalidate the warranty if exceeded.

The equation for endurance is rather simple. All you need to take into account is the capacity of the drive, the P/E cycles of the NAND and the wear leveling and write amplification factors. When all that is put into an equation, it looks like this:

Notice that the correct term for TBW is TeraBytes Written, not TotalBytes Written although both are fairly widely used. The hardest part in calculating the TBW is figuring out the wear leveling and write amplification factors because these are workload depedent. Hence manufacturers often use a worst case 4KB random write scenario to come up with the TBW figure as this ensures that the end-user cannot have a more demanding workload with higher write amplification.

For the uninitiated, the wear leveling factor (WLF) in this context means the maximum stress that the wear leveling method would put onto the most heavily cycled block compared to the average number of cycles. A factor of two would mean that the most heavily cycled block would have twice the number of cycles compared to the average. Write amplification factor (WAF), on the other hand, refers to the ratio of host and NAND writes. A factor of two would in this case mean that for every megabyte that the host writes, two megabytes are written to the NAND. These two factors go hand in hand in the sense that a small WLF results in higher WAF because the drive will do more internal reorganization operations to cycle all blocks equally, which consumes NAND writes.

The interesting part about TBWs is that they actually give us a way to estimate the combined wear leveling and write amplification factor of the drive. In the case of 120GB M500DC, that would be a surprising 0.72x. Obviously you can go lower than 1x without using some form of compression but the 120GB M500DC actually has 192GiB of NAND onboard that extends the endurance. If we used that figure to calculate the combined WLF and WAF, it would be 1.24x, which is much more reasonable. For some reason the JEDEC spec defines the capacity as the usable capacity even for endurance calculations but in the end it doesn't matter what figure you change as they are all related to each other (e.g. with 120GB used as the capacity, the P/E cycles could be higher than 3,000 because the over-provisioned NAND adds cycles).

Ultimately none of the manufacturers are willing to disclose the exact details of how they calculate their endurance ratings but at the high-level this is how it's done according to JEDEC's standards. Furthermore, I wouldn't rule out the possibility that some OEMs artificially lower the ratings for their consumer drives just to make sure they are not used by enterprises. In the end, there isn't really a way for us to find out whether the TBW is accurate or not since the efficiency factors are not easily measurable by third parties like us.

Originally published at https://www.anandtech.com/show/7947/micron-m500-dc-480gb-800gb-review (Wayback Machine).