Archive 1997–2024

IDE RAID Comparison

Performance: Adaptec AAA-UDMA

The I/Os per second performance of our first hardware RAID card, the Adaptec AAA-UDMA, keeps improving as stripe size is increased. Much like we saw with the limited stripe sizes on the Iwill SIDE RAID100, the Adaptec AAA-UDMA hits a stripe limit before performance begins to decrease again.

Once again we see a positive linear trend with the number of MBs per second the array is able to process and the stripe size of the array. If more stripe sizes were present, we would almost certainly see performance peak as we saw with other cards. For the AAA-UDMA, the 128KB setting seems to be the best.

As one could predict by examining the other AAA-UDMA graphs, the I/O response time of the card keeps decreasing as stripe size is increased. Once again, performance keeps increasing throughout the stripe range because of the limited size that the stripes can be.

The CPU utilization of the Adaptec AAA-UDMA is rather spastic, with hardly any trends in the data. This can be attributed to the fact that the CPU is not actually performing the RAID calculations. It is for this reason that the CPU utilization numbers on this card are lower than those of the software RAID cards. We will discuss this more in a bit.

The performance gain that the AAA-UDMA is able to realize when increasing stripe size was quite impressive. From the slowest stripe size of 8KB to the fastest of 128KB, the performance of the card increased a full 29%.

Originally published at https://www.anandtech.com/show/788 (Wayback Machine).