Western Digital My Cloud EX4 and LenovoEMC ix4-300d Home NAS Units Review
- Posted in
- NAS
- Western Digital
- LenovoEMC
Miscellaneous Factors and Final Words
The LenovoEMC ix4-300d and WD EX4 are both 4-bay NAS units, and there are multiple applicable disk configurations (JBOD / RAID-0 / RAID-1 / RAID-5 / RAID-6 / RAID-10). Most users looking for a balance between performance and redundancy are going to choose RAID-5. Hence, we performed all our expansion / rebuild duration testing as well as power consumption recording with the unit configured in RAID-5 mode. The disks used for benchmarking (WD4000FYYZ) were also used in this section. The table below presents the average power consumption of the unit as well as time taken for various RAID-related activities.
| RAID Expansion and Rebuild / Power Consumption | ||||
| Activity | LenovoEMC ix4-300d | Western Digital EX4 | ||
| Duration | Avg. Power | Duration | Avg. Power | |
| Idle (4D) | NA | 17.21 W | NA | 19.83 W |
| Single Disk Init (4TB in JBOD) | Immediate | 21.79 W | 14m | 24.36 W |
| 4 TB JBOD (1D) to 4 TB RAID-1 (2D) | 15h 44m | 32.31 W | 10h 45m | 32.65 W |
| 4 TB RAID-1 (2D) to 8 TB RAID-5 (3D) | 2d 9h 23m | 43.23 W | 1d 13h 42m | 42.62 W |
| 8 TB RAID-5 (3D) to 12 TB RAID-5 (4D) | 1d 7h 48m | 56.11 W | 28m* | 51.19 W* |
| 12 TB RAID-5 Rebuild (4D) | 1d 5h 34m | 53.06 W | 21h 33m | 52.83 W |
Note that the 3-disk RAID-5 to 4-disk RAID-5 expansion step is not applicable for the EX4. Instead, we have data from a fresh 4-disk RAID-5 initialization run in those cells.
Coming to the business end of the review, we find it hard to recommend either the ix4-300d or the EX4. While the ix4-300d turns out to be a better hardware platform (other than the absence of hot-swap capability), the WD EX4 turns out to be the one with a better set of features in the firmware. The performance of the ix4-300d is miles ahead of the WD EX4 for the same configuration, using the same disks. On top of that, the ix4-300d is cheaper too ($270 for the ix4-300d compared to $360 for the WD EX4 in a diskless configuration). However, LenovoEMC has stripped the ix4-300d of some essential features that many consumers take for granted in the NAS space.
Western Digital needs to go back to the drawing board from a hardware perspective. The hardware configuration heavily pulls down the performance. Putting in two USB 3.0 ports (when the SoC is apparently not configured to even take full advantage of the 4x SATA to PCIe x4 bridge) seems to be something done to tick a marketing checkbox item. Considering that WD is new to the 4-bay home-consumer NAS market, this can be excused. Hopefully, when the time comes for a refresh, more attention is paid to such aspects and we get a platform that can do justice to the firmware base that Western Digital has developed.
On the other hand, there is little to complain about the ix4-300d performance-wise. However, LenovoEMC needs to heavily reconsider the way they differentiate between their ix- and px- series units. Other vendors such as QNAP and Synology differentiate their ARM / x86 units only on platform performance (CPU and RAM). The firmware features (at least, those meant for the SOHO/home-consumer market) are uniform across both their ARM and x86 units. LenovoEMC risks losing market share to such vendors if they continue with their current differentiation plan.
Originally published at https://www.anandtech.com/show/7812/western-digital-my-cloud-ex4-and-lenovoemc-ix4300d-home-nas-units-review (Wayback Machine).