Western Digital My Cloud EX4 and LenovoEMC ix4-300d Home NAS Units Review
- Posted in
- NAS
- Western Digital
- LenovoEMC
Multi-Client Performance - CIFS
We put the LenovoEMC ix4-300d and WD EX4 through some IOMeter tests with a CIFS share being accessed from up to 25 VMs simultaneously. The following four graphs show the total available bandwidth and the average response time while being subject to different types of workloads through IOMeter. IOMeter also reports various other metrics of interest such as maximum response time, read and write IOPS, separate read and write bandwidth figures etc. Other interesting aspects from our IOMeter benchmarking run can be found here for the ix4-300d and here for the EX4.




Note that the scales on the graphs are different for the EX4 and the ix4-300d. While the ix4-300d is more than able to saturate a single GbE link, the WD EX4 struggles. In fact, the only saving grace is that the degradation in performance is not much as the number of clients go up, but, then, the initial performance itself was not very impressive. However, for home users who are the target market for the EX4, this may not be a very big concern. The other odd result was that the ix4-300d tended to choke on the rapid 50% sequential read / 50% sequential write test as the number of clients increased. Note that these benchmarks were done with firmware version 3.3.4.29856. Since then, LenovoEMC has released a number of firmware updates with various improvements which might have possibly fixed the issue. In any case, for 5 to 10 simultaneous clients, the performance of the ix4-300d far exceeds that of the EX4.
Originally published at https://www.anandtech.com/show/7812/western-digital-my-cloud-ex4-and-lenovoemc-ix4300d-home-nas-units-review (Wayback Machine).