NEC PA242W Monitor Review
Input Lag is tested on the NEC PA242W using the HDMI input and the Leo Bodnar lag tester. This uses a 1080p signal so there will be some scaling involved, but the 3D LUT is far more likely to cause a decrease in performance. The lag on the NEC PA242W measures just over 27ms. This is more than many gamers would want to put up with, but the NEC PA242W isn’t really targeting gamers either. That lag is low enough that professionals that want it and also want to game sometimes should be fine, but hard-core gamers will be looking elsewhere.

Despite its smaller size and use of LED backlighting, the NEC uses a good bit of power. With its minimum light output of 40 cd/m^2 it consumers 24 watts on an all-white screen. At the maximum normal setting of 240 cd/m^2 it consumers 49 watts. Both numbers are relatively high for the size, and result in low efficiency numbers.


With a G-B LED backlighting system, the NEC PA242W has a gamut larger than the AdobeRGB standard. Because of its internal LUT and correction modes, you are free to choose the appropriate gamut for your work and not have constantly over-saturated colors. For users that need the larger gamut support, NEC delivers it but not at the expense of sRGB and other standard.


Originally published at https://www.anandtech.com/show/7336/nec-pa242w-monitor-review (Wayback Machine).