Archive 1997–2024

ECS A85F2-A Golden Review: All That Glitters

Many thanks to...

We must thank the following companies for kindly donating hardware for our test bed:

OCZ for donating the 1250W Gold Power Supply and USB testing SSD
Micron for donating our SATA testing SSD
G.Skill for donating our memory kits
ASUS for donating AMD GPUs and some IO Testing kit
ECS for donating NVIDIA GPUs

Test Setup

Test Setup
Processor AMD Trinity A10-4800K APU
2 Modules, 4 Threads, 3.8 GHz (4.2 GHz Turbo)
Motherboards ASUS F2A85-V Pro
ASRock FM2A85X Extreme6
MSI FM2-A85XA-G65
Gigabyte F2A85X-UP4
ECS A85F2-A Golden
Cooling ThermalRight Copper TRUE
Power Supply OCZ 1250W Gold ZX Series
Rosewill SilentNight 500W Platinum PSU
Memory G.Skill TridentX 4x4 GB DDR3-2400 9-11-11 Kit
Memory Settings 2133 9-11-11 (or as close to it)
Video Cards ASUS HD7970 3GB
ECS GTX 580 1536MB
Video Drivers Catalyst 12.3
NVIDIA Drivers 296.10 WHQL
Hard Drive Micron RealSSD C300 256GB
Optical Drive LG GH22NS50
Case Open Test Bed - DimasTech V2.5 Easy
Operating System Windows 7 64-bit
USB 2/3 Testing OCZ Vertex 3 240GB with SATA->USB Adaptor

Power Consumption

Power consumption was tested on the system as a whole with a wall meter connected to the OCZ 1250W power supply, while in a dual 7970 GPU configuration.  This power supply is Gold rated, and as I am in the UK on a 230-240 V supply, leads to ~75% efficiency > 50W, and 90%+ efficiency at 250W, which is suitable for both idle and multi-GPU loading.  This method of power reading allows us to compare the power management of the UEFI and the board to supply components with power under load, and includes typical PSU losses due to efficiency.  These are the real world values that consumers may expect from a typical system (minus the monitor) using this motherboard.

While this method for power measurement may not be ideal, and you feel these numbers are not representative due to the high wattage power supply being used (we use the same PSU to remain consistent over a series of reviews, and the fact that some boards on our test bed get tested with three or four high powered GPUs), the important point to take away is the relationship between the numbers.  These boards are all under the same conditions, and thus the differences between them should be easy to spot.

Power Consumption - Two 7970s

In our setup, the ECS board has the lowest power consumption for idle, and is middle of the pack in both OCCT and dual 7970 loading.

Non-Windows 8 POST Time

Different motherboards have different POST sequences before an operating system is initialized.  A lot of this is dependent on the board itself, and POST boot time is determined by the controllers on board (and the sequence of how those extras are organized).  As part of our testing, we are now going to look at the POST Boot Time - this is the time from pressing the ON button on the computer to when Windows 7 starts loading. (We discount Windows loading as it is highly variable given Windows specific features.)  These results are subject to human error, so please allow +/- 1 second in these results.

POST (Power-On Self-Test) Time

A good result for ECS in POST timing, especially when compared to the previous ECS boards we have tested.  The A85F2-A Golden also hits under the 12 second mark.

Originally published at https://www.anandtech.com/show/6626/ecs-a85f2a-golden-review-all-that-glitters (Wayback Machine).