Fractal Design Node 304 mITX Case Review: Paving the Way to the Future
Noise and Thermal Testing, IGP
Admittedly, clearing out two of the drive brackets probably helped testing a great deal, but interestingly I'm not sure our stock testbed is actually very ideal for the Fractal Design Node 304. The reason is the way the motherboard is essentially stuck in a bit of a valley between the intake fans and the exhaust, hiding behind the power supply. A tower cooler would probably work gangbusters in this enclosure, but you'll see that even with the suboptimal downdraft cooler we still had reasonable performance.
The Node 304 was tested at all three fan control settings, and with winter setting in, ambient temperatures hovered between 23C and 24C.


You can see thermals are essentially competitive without being mindblowing. I think a tower cooler would make a big difference in this case, but as it stands the Node 304 isn't bad. Note that the higher fan speeds don't really add anything to the performance.

And, same as before, the different fan speeds don't produce any appreciable difference in performance. There's just no reason to run it at higher than the lowest fan setting.

I think it's particularly important to point out that the Node 304 at its lowest fan setting is basically inaudible at idle. Our sound meter doesn't dip low enough to tease out the differences, but you can see now that there's really no reason to turn up the fans. Even under sustained load, the Node 304 is incredibly quiet, and that makes the middle-of-the-road thermals much more tolerable.
Originally published at https://www.anandtech.com/show/6470/fractal-design-node-304-mitx-case-review-paving-the-way-to-the-future (Wayback Machine).