Crucial v4 (256GB) Review
Introduction
The biggest reason why SSDs have not become truly mainstream (yet) is price. While prices have come down significantly over the last year, you are are still paying roughly $0.75 per GB, whereas hard drives can usually bought for less than $0.10 per GB. For an enthusiast, it shouldn’t be a problem to pay up to ten times more per GB if it yields significantly better performance, but the consumer market is much harder to convince. Most aren’t ready spend hundreds of dollars on a single component, especially if there is a cheaper alternative that is sufficient. In this case, hard drives also offer more capacity, which can make it very hard for consumers to understand the benefits of an SSD.
Besides price, there is another problem. Most SSDs sold today are SATA 6Gbps but the vast majority of computers are only compatible with older and slower SATA 1.5Gbps and 3Gbps standards. That means consumers who don’t have a SATA 6Gbps compatible computer will not be able to take advantage of the extra IO bandwidth that the SATA 6Gbps SSDs offer, and it may feel pointless to pay for something you can’t use. Of course, there are previous generation SSDs that are SATA 3Gbps but they aren’t necessarily cheaper due to the use of more expensive NAND (2Xnm vs 3Xnm).
However, almost any SSD is faster than a traditional hard drive, be that 2.5” 5400RPM, 3.5” 7200RPM or even a 10,000RPM VelcoiRaptor. Crucial sees that there is a market for low-end SSDs, which are not as fast as today’s fastest drives but offer a more affordable $/GB ratio. The v4 SSD is specifically targeted at consumers with SATA 3Gbps and due to the usage of a cheaper controller, Crucial was able to price the drive below its 6Gbps counterparts...but is it priced low enough to really sell?
| Crucial v4 Specifications | ||||
| Capacity | 32GB | 64GB | 128GB | 256GB |
| NAND | Micron 25nm synchronous MLC NAND | |||
| Controller | Phison PS3105 | |||
| Sequential Read | 200MB/s | 230MB/s | 230MB/s | 230MB/s |
| Sequential Write | 60MB/s | 100MB/s | 175MB/s | 190MB/s |
| 4K Random Read | 10K IOPS | 10K IOPS | 10K IOPS | 10K IOPS |
| 4K Random Write | 1.2K IOPS | 2.4K IOPS | 4K IOPS | 4K IOPS |
Performance wise the v4 is significantly behind SATA 6Gbps SSDs. Sequential speeds are actually fairly normal for SATA 3Gbps SSDs but random speeds are awful to get straight to the point. Even the Intel SSD 320 has three to four times higher random read/write speeds and it's a year and a half old drive, so the random performance is really not good by today's standards. We'll soon see how the random speeds impact real world performance, but the specs aren't overwhelming.
| NewEgg Price Comparison (11/22/2012) | ||||
| Capacity | 32GB | 60/64GB | 120/128GB | 240/256GB |
| Crucial v4 | $50 | $65 | $85 | $160 |
| Crucial m4 | N/A | $73 | $110 | $200 |
| Samsung 830 | N/A | $70 | $104 | $200 |
| Intel SSD 330 | N/A | $70 | $104 | $140 |
| Plextor M5S | N/A | $50 | $110 | $200 |
| OCZ Vertex 4 | N/A | $80 | $75 | $160 |
| OCZ Agility 4 | N/A | $75 | $95 | $165 |
| Mushkin Enhanced Chronos | N/A | $65 | $100 | $165 |
As for the pricing, the v4 is cheaper compared to it's big brother m4 but there are other, faster SSDs that offer similar pricing. For example the Mushkin Enhanced Chronos is only $5-15 more expensive depending on the capacity and there are others such as Kingston SSDNow V+200 and OCZ Agility 3 that are priced equivalently. Samsung's 830 drives are also regularly on sale, and we've seen the 128GB drive go for as little as $85 with the 256GB now routinely on sale for $170 or so (or $190 for the kit). Even if you're stuck with a 3Gbps SATA connection, it's a safe bet that $5 to $10 more will get you much better performance. How much better? We'll get to that on page three....
Originally published at https://www.anandtech.com/show/6325/crucial-v4-256gb-review (Wayback Machine).