Archive 1997–2024

Rosewill Fortress Platinum 450W

Internal Design

ATNG makes the electronics this time, but 80 Plus Platinum power supplies are almost always the same. In fact the PCB looks like a modified Golden Green (Super Flower). The core is an LLC resonant converter with synchronous rectifying on the secondary side, and there's a DC-to-DC converter at the far right as well to improve voltage regulation. Another advantage is the high 12V power rating. The filtering stage is located on a small sister PCB near the bottom of the picture and includes all the important components.

An IC offers most safety functions for all outputs and the primary circuit has some protections too; nevertheless, overcurrent protection is missing. There are two large heatsinks instead of the usual three, but all the current MOSFETs have a low power dissipation. Soldering quality is satisfying, and we couldn't find any dry soldered joints, though a few parts did get a bit too much solder. On one pin we found a bad wetting angle caused by the excessive use of solder.

Originally published at https://www.anandtech.com/show/6168/rosewill-fortress-platinum-450w (Wayback Machine).