Rosewill Fortress Platinum 450W
External Impressions and Cables
The appearance has not changed much from Rosewill's 80 Plus Gold Capstone series; the Fortress comes with a rough sandblasted texture that reminds us of some Enermax PSUs. The angular fan grille is black and the silk-screened Fortress logo can be found on both sides. As usual, the entire back is perforated to provide maximum airflow. A power switch can be found directly below the power input. The unit is quite long for a 450W model at 163mm, so it is probably not the perfect solution for HTPCs.
| Cables and Connectors | ||
|
Connector type (length) |
Main | 1x 24-pin (55cm) fixed |
| ATX12V/EPS12V | 1x 4+4-pin (65cm) fixed | |
| PCIe | 2x 6/8-pin (50, 65cm) fixed | |
| Peripheral |
3x SATA (ca. 50, 65, 80 cm) fixed 3x SATA (ca. 50, 65, 80 cm) fixed |
|
|
3x Molex (ca. 50, 65, 80cm) fixed 2x Molex, 1x FDD (ca. 50, 65, 80cm) fixed |
||
There are five Molex and six SATA connectors attached—quite a lot for the power rating. Moreover there is a very long 4/8-pin cable for the motherboard and two plugs for a graphics card; the long ATX12V/EPS12V cable is particularly important for cases with bottom-mounted PSUs. You won't be able to run an SLI or CrossFire setup with the highest performance GPUs, but two 8-pin PEG connectors are exactly what we would expect from a 450W power supply. In addition all peripheral cables are long which is helpful when using a Full Tower, and all the cables have the same black cable sleeving. If you're planning on building a smaller mATX system, the fixed cables and their lengths might be too much, but for ATX cases that shouldn't be a problem.
Originally published at https://www.anandtech.com/show/6168/rosewill-fortress-platinum-450w (Wayback Machine).






