Archive 1997–2024

OCZ Vertex 4 Review (128GB), Firmware 1.4/1.5 Tested

Random Read/Write Speed

The four corners of SSD performance are as follows: random read, random write, sequential read and sequential write speed. Random accesses are generally small in size, while sequential accesses tend to be larger and thus we have the four Iometer tests we use in all of our reviews. Our first test writes 4KB in a completely random pattern over an 8GB space of the drive to simulate the sort of random access that you'd see on an OS drive (even this is more stressful than a normal desktop user would see).

We perform three concurrent IOs and run the test for 3 minutes. The results reported are in average MB/s over the entire time. We use both standard pseudo randomly generated data for each write as well as fully random data to show you both the maximum and minimum performance offered by SandForce based drives in these tests. The average performance of SF drives will likely be somewhere in between the two values for each drive you see in the graphs. For an understanding of why this matters, read our original SandForce article.

Desktop Iometer - 4KB Random Read (4K Aligned)

.Desktop Iometer - 4KB Random Write (4K Aligned) - 8GB LBA Space

Desktop Iometer - 4KB Random Write (8GB LBA Space QD=32)

Neither the 1.4 or 1.5 firmware promised any improvements regarding random read/write performance. 

As for the 128GB model, which is new in our tests, its random read/write performance is actually on-par with 256GB and 512GB capacities. This is a pleasant surprise the difference between the 128GB and 256GB capacities in many families can be quite substantial (e.g. Samsung's SSD 830).

Sequential Read/Write Speed

To measure sequential performance we ran a one minute long 128KB sequential test over the entire span of the drive at a queue depth of 1. The results reported are in average MB/s over the entire test length.

Desktop Iometer - 128KB Sequential Read (4K Aligned)

It's relieving to look at the graph above. It's now a fact that the 1.4 firmware fixes the sequential read speed at low queue depths issue. Not only does the firmware fix the issue, the sequential read performance is also very good. 

Desktop Iometer - 128KB Sequential Write (4K Aligned)

OCZ was promising increased sequential write performance for all models with the 1.5 firmware but at least in Iometer, at low queue depths, the difference is negligible. We'll take a look at AS-SSD and ATTO at higher queue depths next.

Originally published at https://www.anandtech.com/show/6074/ocz-vertex-4-review-128gb (Wayback Machine).