LRDIMMs, RDIMMs, and Supermicro's Latest Twin
HyperCloud DIMMs
There is a fourth option: Netlist's HCDIMM. Netlist, a company that specializes in making VLP (Very Low Profile) memory, offers an alternative for LRDIMMs: HyperCloud DIMMs.
Instead of using a centralized buffer (LRDIMMs), HCDIMMs use a distributed buffer to reduce the electrical load on the memory channels. Combined with an HCDIMM register, four ranks are presented as two.
HCDIMM advantages
The advantage of HCDIMMs is that HCDIMMs run one speed bump faster than LRDIMMs. So while LRDIMMs have to throttle back to 1066MHz at 3 DPC, HCDIMMs run at 1333MHz. According to a Netlist sponsored report, HCDIMMs offer about 17% higher bandwidth, which sounds reasonable to us. Secondly, the distributed buffer architecture is the same architecture that DDR4 is converging on. However DDR4 will be running at a much lower 1.2V.
HCDIMM Disadvantages
The combination of a register and distributed buffers (and clock redundancy) comes with a serious drawback: power. Although we could not test HCDIMMs ourselves, most industry sources talk about 20% higher power than LRDIMMs, while LRDIMMs only consume more than RDIMMs with 1 DPC. In 3 DPC configurations, LRDIMMS consume about the same as RDIMMs.
Secondly, HCDIMMs are not a JEDEC standard. As a result the HCDIMM ecosystem—module, server and CPU vendors—is smaller. AMD and Intel do not officially validate HCDIMMs, so server vendors have do the complete validation effort themselves. IBM for example only offers them in one system (IBM system x3650 M4), and 16GB HCDIMMs are quite a bit more expensive than both 16GB LRDIMMs and RDIMMs. LRDIMMs are much more widespread; almost every server vendors supports them in a wide range of server models.
Lastly, HCDIMMs are only available from one module vendor, Netlist.
Nevertheless, HCDIMMs are viable but somewhat expensive alternative in the high capacity memory market if your server supports them. Netlist has been quite successful in convincing the server vendors: several models of HP, Supermicro, and Gigabyte support HCDIMMs. HP offers HCDIMMs in their most popular servers (DL380/DL360), although HCDIMMs can only be installed by HP.
Once Netlist gets the 32GB parts out in large volumes, the extra competition can probably drive prices down. Until then, HCDIMMs offer only a speed advantage over RDIMMs.
Overview
Let us structure all this info in a table.
| DIMM Types, Speed, and Capacity Limitations | ||||||
| DIMM type | UDIMM | RDIMM | RDIMM LV | LRDIMM | HCDIMM | |
| Maximum speed at 2 DPC | 1333MHz | 1600MHz | 1333MHz | 1333MHz | 1600MHz | |
| Maximum speed at 3 DPC | Not possible | 1333MHz | 1333MHz | 1066MHz | 1333MHz | |
| Maximum capacity per CPU (Quad channel) | 64GB |
192GB (3 DPC) 256GB (2 DPC)* |
192GB (3 DPC) 256GB (2 DPC)* |
384GB | 192GB | |
| Top speed at maximum capacity | 1066 |
1066 (DR) ** 800 (QR) ** |
1066 (DR) ** 800 (QR) ** |
1066 | 1333 | |
| Voltage | 1.5V | 1.5V | 1.35 V | 1.35V/1.5V | 1.35V/1.5V | |
| loaded, 3 DPC Power usage (at 1.5V) per DIMM | 4 W | 4.5 W | <= 4 W | 5-6 W | 8-9 W | |
| Intel CPU support |
Xeon 5500 Xeon 5600 Xeon E5 |
Xeon 5500 Xeon 5600 Xeon E5 |
Xeon 5600 Xeon E5 Xeon E7 |
Xeon 5600 Xeon E5 Xeon E7 |
N/A | |
| AMD CPU support |
Opteron 4000 Opteron 6100 Opteron 6200 |
Opteron 4000 Opteron 6100 Opteron 6200 |
Opteron 6100 Opteron 6200 |
Opteron 6200 | N/A | |
| Server support | all servers | all servers | all servers | Dell, HP, IBM,Supermicro |
HP DL360G8 DL380G8 IBM x3650 M4 Supermicro |
|
* Quad Rank DIMMs require special BIOS support and validation and are not available on all servers.
** DR = Dual Rank, QR = Quad Rank.
1600MHz LRDIMMs are possible but not commercially available as far as we know. 32GB HCDIMMs are available in very small quantities. LRDIMMs are available from almost every server module manufacturer out there, while HCDIMMs are netlist modules only.
Originally published at https://www.anandtech.com/show/6068/lrdimms-rdimms-supermicros-latest-twin (Wayback Machine).
