SilverStone FT03 Mini Review: We'll Make You Fun Size
In and Around the SilverStone FT03 Mini
As I mentioned before, the FT03 Mini looks just like the FT03 except smaller. SilverStone uses thick aluminum panels on all four sides of the enclosure, sturdy plastic for accents like the I/O and buttons on the top of the enclosure and the bottom fan intake, and then steel for the structure of the enclosure itself. The result is that externally, there isn't a whole lot to remark on. It has four flat aluminum sides, and then the motherboard's I/O cluster and power supply are both mounted to the top of the case and accessible by removing the plastic top cover.

SilverStone has largely pioneered using a rotated motherboard mounting system in their enclosures, but it really makes sense with the FT03 Mini. The base of the enclosure is basically square, and right in the bottom center is a 140mm intake fan. The case also sits off of the floor high enough that only the shaggiest of rugs should prevent fresh air from coming in through the bottom of the FT03 Mini. Fresh air blows through the single chamber and out of the top of the case. It's a sound engineering design and you'll see it pays off in spades.
I've often compared SilverStone's cases to puzzle boxes due to the very specific way they come apart and back together, but nowhere has that comparison been more appropriate than with the FT03 Mini. End users ignore the instruction manual at their own peril; we're at the point where you'll need it just to figure out how to get the case open in the first place. I'm not inclined to mark SilverStone down for this, though, because the instructions are clear enough and because there's a definite logic to how the case tears down.

In order, you pop the top off of the case, then the two side panels snap off instead of sliding upwards (a welcome improvement on the FT03, which was easy to accidentally pop the side panels off of when you were moving it), then the back panel snaps off, then the optical drive cage comes out, and attached to that are cages for a 3.5" drive and a 2.5" drive. We have the disassembly sequence in our gallery if you're inclined to check it out.
The interior of the FT03 Mini is built out of black-painted steel, and the whole enclosure is really very sturdy. You're not liable to spend much time looking at the inside of the case, but I can't stress enough how important the logic of the case's assembly is. It comes apart and back together in a very specific order, which is vital for a design this unique. Once you understand SilverStone's logic, you'll find the case is remarkably well thought out.
Originally published at https://www.anandtech.com/show/5848/silverstone-ft03-mini-review-well-make-you-fun-size (Wayback Machine).





