Archive 1997–2024

LaCie's 2big NAS Review

Feedback from readers indicates that the single client Intel NASPT benchmarking results presented in our NAS reviews tell only part of the story. How does the NAS behave under real SMB conditions, i.e, multiple clients simultaneously accessing it? What is the average response time? We believe these are valid concerns for 4-bay and higher configuration units. With that in mind, we have started revamping our NAS testbed.

Our intermediate testbed configuration is provided in the table below:

NAS Benchmarking Testbed Setup [ Q2 2012 ]
Processor Intel i7-3770K CPU - 4C/8T - 3.50GHz, 8MB Cache
Motherboard Asus P8H77-M Pro
OS Hard Drive Seagate Barracuda XT 2 TB
Secondary Drive Kingston SSDNow 128GB (Offline in Host OS)
Memory G.SKILL ECO Series 4GB (2 x 2GB) SDRAM DDR3 1333 (PC3 10666) F3-10666CL7D-4GBECO CAS 7-7-7-21
PCI-E Slot Quad-Port GbE Intel ESA-I340
Case Antec VERIS Fusion Remote Max
Power Supply Antec TruePower New TP-550 550W
Host Operating System Windows Server 2008 R2 Enterprise
.

Two virtual machines were set up using Hyper-V with the following configuration

Windows 7 Ultimate x64 : Guest OS
Processor Single Physical Core of Intel i7-3770K
OS Hard Drive VHD File on Seagate Barracuda XT 2 TB
Secondary Hard Drive Kingston SSDNow 128GB
Memory 1 GB
CentOS 6.2 x86_64 : Guest OS
Processor Single Physical Core of Intel i7-3770K
OS Hard Drive VHD File on Seagate Barracuda XT 2 TB
Secondary Hard Drive Kingston SSDNow 128GB
Memory 1 GB

The usage of VMs as NAS clients allows us to test Samba and NFS performance from a single host machine. While Intel NASPT can run on Windows (and has to be restricted to 2 GB of RAM in order to avoid caching effects), IOMeter / Dynamo can be used to measure performance in Linux.

The Kingston SSDNow 128 GB SSD we used in the earlier testbed has been reused here. In the host OS, this disk is set to offline, and is made available to the Hyper-V VMs as a physical drive. Note that we don't do any teaming in the Intel ESA-I340 in this testbed. Each VM gets its own physical Ethernet port in the ESA-I340, and the host OS uses the motherboard's built-in GbE port. All the Ethernet ports are connected to a ZyXel GS2200-24 switch.

In order to rule out VMs affecting the results by a wide margin, we first ran the Intel NASPT benchmarks using the old testbed and compared with what was obtained by running it on the Windows 7 VM. The numbers were off by +- 3-4 MBps, with the deviation being less than 1 MBps for tests such as Content Creation. Effects such as physical machine performance being consistently better than the VM performance were not observed.

For measurement of performance in Linux, dynamo was run on the Linux VM and connected to an IOMeter instance run on the host OS. Four tests were run to determine the characteristics of the NAS as a storage system for the client. In order to completely rule out caching effects, a special build of IOMeter with O_DIRECT access mode for NFS shares was used.

The robocopy / rsync benchmarks (transferring a 10.7 GB folder structure backup of the HQV 2.0 Benchmark Blu-ray to and from the NAS to the internal SSD) were also run in both the VMs.

Originally published at https://www.anandtech.com/show/5838/lacies-2big-nas-review (Wayback Machine).