NEC PA271W - When Accuracy and Consistency Matter
NEC PA271W - Design and Specifications
As long as I’ve been following, using, or writing about computers, NEC has been a leader in displays. From the early MultiSync monitors to their current line of LCDs, they have been focused more on pushing performance than on dropping price, which has kept many of us from owning one of their displays. Of course, there is a large swath of users that always want to have the best, and are willing to pay for it.
Back with a CRT, this was pretty easy to do. We didn’t have to worry about lag, we could run multiple resolutions on a display natively, and if a display supported higher resolutions, faster refresh rates, and better sharpness, it was likely going to work for most power users. Now the field is a little different, as you have to worry about the native resolution of your panel, the response time, viewing angles, color quality, and more. All of this has led to a marketplace with different solutions for different needs than before where a "one-size-fits-all" approach doesn't really exist anymore.
Virtually every 27” 2560x1440 IPS display out there currently uses a panel from LG as its starting point. From there your choices can be from CCFL or LED backlights, sRGB or AdobeRGB color gamuts, and the electronics you wish to engineer behind the panel. It is in the panel electronics and settings that NEC adds their own engineering to set their displays apart from the rest.
When you take it out of the box, you’ll notice that the PA271W is very large and almost overbuilt. Where many lower end, consumer focused panels are engaged in a race to how thin they can be, the NEC is a sizable display that is fairly heavy and takes up a large amount of space. One reason for the large size is the presence of a custom designed cooling system for the CCFL backlight. As the monitor warms up and the lamp comes up to its full operating temperature, it can cause color shifts across the panel. NEC is aware of this and has made the display as large as necessary to deal with this issue.
To further deal with color shifts across the panel, NEC has a display uniformity option that lets you sacrifice maximum brightness for a smaller shift across the panel. Each panel is individually measured and calibrated at the factory for this feature, so that if you are looking at a solid white screen it should remain white across the whole screen, free of any shifts to red, green, or blue. There is also a pair of upstream USB connectors instead of the usual one, which allows the NEC to function as a KVM switch as you move between inputs.
The OSD in the NEC is full of all the information you could want to know, from the current colorspace and brightness to how much power you have used since you installed the display. The menu system works well, with labels for all the controls that appear on the screen when you pop it up. It does a good job of not changing how different buttons interact with the menu on different screens, which is what makes some OSD systems a pain to navigate, but it does spread the buttons out a bit which makes it harder to navigate than those from Dell. Overall the OSD is well done.
Of course with an IPS panel you expect good viewing angles, and the NEC doesn’t disappoint here. If you get to extreme viewing angles you can start to see a bit of a shift, but it’s impossible to do any work with an angle like that so I wouldn’t consider it an issue at all.
| NEC PA271W | |
| Video Inputs | 1x DisplayPort, 2x DVI-DL |
| Panel Type | IPS (8-bit native, 10-bit with A-FRC) |
| Pixel Pitch | 0.23mm |
| Colors | 1.07 Billion |
| Brightness | 300 nits |
| Contrast Ratio | 1000:1 |
| Response Time | 7ms |
| Viewable Size | 27" |
| Resolution | 2560x1440 |
| Viewing Angle | 178/178 Horizontal/Vertical Degrees |
| Backlight | CCFL |
| Power Consumption (operation) | 117W |
| Power Consumption (standby) | 1.4W |
| Screen Treatment | Anti-Glare |
| Height-Adjustable | Yes |
| Tilt | Yes |
| Pivot | Yes |
| Swivel | Yes |
| VESA Wall Mounting | Yes, 100x100mm or 100x200mm |
| Dimensions w/ Base (WxHxD) | 25.2 x 15.6-21.5 x 9.3 in. |
| Weight | 30 lbs |
| Additional Features | 2 USB Up, 2 USB Down, 14-bit LUT |
| Limited Warranty | 4 years |
| Accessories | DisplayPort cable, USB Cable, DVI Cable, Power Cord. Optional SpectraView calibration package. |
| Price | $1098 + shipping online (as of May 1, 2012) |
Originally published at https://www.anandtech.com/show/5752/nec-pa271w-when-accuracy-and-consistancy-matter (Wayback Machine).

















