Seasonic Platinum Series 860W - Platinum without the Fuss
Voltage Regulation
| +3.3V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | +1.28% (5mV) |
| 10% | +1.24% (6mV) |
| 20% | +1.12% (8mV) |
| 50% | +0.24% (10mV) |
| 80% | -1.23% (11mV) |
| 100% | -1.67% (14mV) |
| 110% | -1.79% (14mV) |
| Crossload +12V max. | +0.61% |
| Crossload +3.3V/+5V max. | +0.00% |
| +5V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | +1.20% (7mV) |
| 10% | +0.82% (7mV) |
| 20% | +0.40% (9mV) |
| 50% | -0.02% (11mV) |
| 80% | -0.94% (12mV) |
| 100% | -0.92% (12mV) |
| 110% | -0.86% (13mV) |
| Crossload +12V max. | +0.28% |
| Crossload +3.3V/+5V max. | -0.04% |
| +12V Regulation (Worst Rail)/Ripple and Noise (Worst Rail) | |
| Load | Voltage |
| 5% | +1.13% (4mV) |
| 10% | +1.04% (5mV) |
| 20% | +0.98% (22mV) |
| 50% | +0.48% (16mV) |
| 80% | +0.01% (20mV) |
| 100% | -0.31% (24mV) |
| 110% | -0.67% (26mV) |
| Crossload +12V max. | -0.17% |
| Crossload +3.3V/+5V max. | +0.13% |
Noise Levels
| Loudness | |
| Load | Opinion |
| 5% | low fan noise and small electrical side noise |
| 10% | low fan noise and small electrical side noise |
| 20% | low fan noise and small electrical side noise |
| 50% | fan noise and small electrical side noise |
| 80% | strong fan noise and small electrical side noise |
| 100% | strong fan noise and small electrical side noise |
| 110% | strong fan noise and small electrical side noise |
Efficiency and PFC
| Efficiency (AC input minus DC output) and Power Factor | ||
| Load | Efficiency | PFC |
| 5% | 79.83% | 0.712 |
| 10% | 86.53% | 0.898 |
| 20% | 90.77% | 0.942 |
| 50% | 93.03% | 0.979 |
| 80% | 91.99% | 0.988 |
| 100% | 91.40% | 0.989 |
| 110% | 91.27% | 0.990 |
The ball bearing is (almost) inaudible under high loads. During low loads you might hear the PFC choke if you are close enough, but this shouldn't be a problem when the PSU is mounted in a closed case. If desired the fan can be turned off through up to 40% load by a small switch on the front of the casing, which would make the PSU completely silent at lower loads (other than the electrical noise we noted).
Efficiency is much higher than expected. Seasonic is well above the requirements for the 80 Plus Platinum certificate (90%/92%/89% efficiency at 20%/50%/100% load). Even at lower loads Seasonic is able to surpass most results from competing products. In addition the Platinum Series 860W performs much better than what we saw from the Enermax Platimax 750W. It's only at 5% load that this PSU is below 80% efficiency, and even then it's basically a rounding error. So far this is an exceptionally good result; PFC could be a little better, but we don't want to overdo things.
During all loads voltage regulation is simply perfect. Even under crossload conditions all voltages are close to their optimal values. -1.67% is the "worst" result on 3.3V while 12V is much better (-0.31% as long as we stay at <100% load). Another highlight is the low ripple voltage. We would like to see such results more often, since 26mV on 12V is only 0.22% ripple and noise—according to the ATX specification 1% is allowed. Enermax had no problems with this level as well and makes stable outputs too, but ripple was noticeably higher. Given these results, Seasonic is clearly the winner in our head-to-head comparison.
Originally published at https://www.anandtech.com/show/5464/seasonic-platinum-series-860w (Wayback Machine).